I | Tubing Spool |
1 | BOTTOM FLANGE 11" X 3000 # BY TOP FLANGE 7-1/16" X 3000 # AND BOTTOM MUST BE PREPARED TO BE APPLICABLE EITHER FOR 7" CASING OR 5 1/2" CASING.TUBING SPOOL IS TO BE FURNISHED WITH 2 STUDED SIDETO BE FURNISHED WITH TIE-DOWN SCREWS FOR TUBING HANGER CONE .OUTLETS FOR 2-1/16"X 3000 PSI FLANGE TYPE GATE VALVES. TOP FLANGE BOTTOM PREPARED WITH DOUBLE " P" SEALS FOR 5 1/2" CASING INCLUDING ALLEN WRENCH AND PLASTIC PACKIN |
2 | TUBING HANGER FOR ABOVE SPOOL WITH 2-7/8" EUE, 8 TPI ROUND API TOP AND BOTTOM |
3 | RING GASKET, R-53 FOR 11" X 3000# WP FLANGE ( BOTTOM ) |
4 | STUD BOLT WITH TWO NUTS 1 3/8" DIA X 10 3/4" LONG FOR BOTTOM FLANGE |
5 | R-45 RING JOINT GASKET |
6 | STUD BOLT WITH TWO NUTS 1 1/8" DIA X 8 1/2" LONG FOR TOP FLANGE |
7 | STUD BOLT WITH ONE NUT 7/8" DIA X 6 1/4" LONG |
8 | 2 1/16" X 3000# FLANGE TYPE GATE VALVE, FULL ROUND OPENING, C/W HAND WHEELS |
9 | R-24 RING GASKET FOR 2 1/16" X 3000# EXPANDING VALVES |
10 | STUD BOLT WITH TWO NUTS 7/8" DIA X 6 1/4" LONG |
11 | COMPANION FLANGE 2 1/16" X 3000 # WP X 2" LINE PIPE THREAD |
12 | 2" LINE PIPE THREADED SOLID BULL PLUG(3000#) |
13 | 2" LINE PIPE THREADED BULL PLUG , TAPPED WITH 1/4" NPT HOLE (3000#) |
14 | 2 3/8" X 2 7/8" EUE CHANGE NIPPLE ( ID MUST BE LARGE ENOUGH SO THAT 2 3/8" SWAB CUP ( OD=1.92" ) MAY PASS THROUGH INSIDE
2 3/8" X 2 7/8" CHANGE NIPPLE (3000#) |
II | Adapter Flange |
1 | TOP 2 9/16" X 3000 PSI STUDDED AND BOTTOM 7-1/16" X 3000 PSI (Adapter Flange) |
2 | RING JOINT GASKET R-27 FOR TOP FLANGE 2-9/16" X 3000 PSI |
3 | STUD BOLT WITH ONE NUT 1" DIA X 7"LONG |
III | Master Valve |
1 | 2 9/16" X 3000 PSI WP API FLANGE ENDS FULL ROUND OPENING GATE VALVE C/W HAND WHEELS |
2 | RING JOINT GASKET R-27 |
3 | STUD BOLT WITH 2 NUTS 1" DIA X 7"LONG |
IV. | Forge Steel Cross |
1 | 2 9/16" VERTICAL X 2 1/16" OUTLETS X 3000 # WP STUDDED STEEL CROSS C/W NUTS |
2 | RING JOINT GASKET R-27 FOR 2 9/16" VERTICAL OUTLETS |
3 | RING JOINT GASKET R-24 FOR 2 1/16" SIDE OUTLETS |
4 | STUD BOLT WITH ONE NUT 1" DIA X 7" LONG FOR VERTICAL OUTLETS |
5 | STUD BOLT WITH ONE NUT 7/8" DIA X 6 1/4" LONG FOR SIDE OUTLETS |
V. | SWAB Valve |
| (a) 2 9/16" X 3000 PSI # FLANGE TYPE GATE VALVE, FULL ROUND OPENING, COMPLETE WITH HAND WHEEL |
| STUD BOLT WITH TWO NUTS 1" DIA X 7" LON |
| R-27 RING JOINT GASKET FOR SWAB VALVE |
| 2 9/16" X 3000 # FLANGE TYPE TREE CAP WITH TOP CONNECTION 5 3/4", 4 TPI ACME( 4.75" SEAL DIA ) OTIS MALE FOR SCHL ( WHE ) INSTALLATION & 8 TPI EUE THREAD INSIDE FOR SWABBING LINE INSTALLATION |
VI. | Wing Valves |
1 | 2 1/16" X 3000 PSI # FLANGE TYPE GATE VALVE, FULL ROUND OPENING, COMPLETE WITH HAND WHEEL |
2 | R-24 RING GASKET |
3 | STUD BOLT WITH 2 NUTS 7/8" DIA X 6-1/4" LONG |
4 | POSITIVE CHOKE 2-1/16 X 3000# WP FLANGES INLET AND OUTLET I" MAX ORIFICE, WITH BLANKING PLUG X TAPPED 1/2" NPT AND PLUG |
5 | ADJUSTABLE CHOKE, 2 1/16" X 3000 # WP FLANGED INLET AND OUTLET, 1" MAX ORIFICE, WITH TUNGSTEN CARBIDED STEM AND SEAT, COMPLETE WITH HAND WHEELS |
6 | LONG FLOW BEAN POSITIVE CHOKE SET OF
6/64 8/64", 10/64", 12/64", 14/64", 16/64", 18/64", 20/64", 22/64", 24/64", 26/64", 28/64", 30/64", 32/64", 34/64", 36/64", 38/64", 40/64", 42/64", 44/64", 46/64", 48/64" |
7 | 2 1/16" X 3000# WP LINE PIPE THREADED COMPANION FLANGE |
8 | 2" X 6" (3000# ) LINE PIPE THREADED NIPPLE |
9 | 2 1/16" X CLASS 800 LB ANSI SCREWED TYPE GATE VALVE ( NON API VALVE )
FULL ROUND OPENING, C/W HAND WHEEL (TO INSTALL DOWN STREAM OF
CHOKE ON EACH WING) |