Oilfield Integral blade drilling stabilizer forging 26"

STRING STABILIZER INTEGRAL BLADE STABILIZER 

SINGLE PIECE BODY MADE FROM A14145H MODIFIED ALLOY STEEL FULLY HEAT TREATED TO 285-341 BRINELL HARDNESS AND 52 JOULES MINIMUM IMPACT STRENGTH VALUE, ALL CONNECTIONS MACHINED AND FINISHED ACCORDING TO API STANDARDS ALL THREAD ROOTS COLD ROLLED , PHOSPHATIZED COATED API STRESS RELIEF GROOVE PIN AND SHORE BORE ON BOX, COATED WITH API THREAD COMPOUND AND SUPPLIED WITH LIFTING BALL TYPE THREAD PROTECTORS ON BOTH ENDS HARDFACING, THE OPEN RH SPIRAL BLADE SHOULD BE DRESSED WITH TUNGSTEN CARBIDE( INSERT BRICK WORK PATTERN) BONDED TO THE BLADE WITH NICKLE OR COBALT ALLOY MATRIX FOR USE IN VERY ABRASSIVE FORMATION

1. Size: 6"--36"
2..Material: AISI 4145H,4145 MOD,AISI 4340,AISI 4140-4142, Non-mag material

API 7-1 near bit stabilizer and string stabilizer

Delivery Condition of semi-finished stabilizer or reamer forgings:

Heat treated by water quenching and tempering,rough machined to drawing dimensions, UT-Tested according to ASTM A-388

Mechanical property:      Requirement:

Tensile Strength             140.000PSI Min

Yield  Strength               110.000PSI (0.2% offset)Min

Elongation                      13% Min

Reduction of Area            45% Min

CHARPY-V-N                  40

Hardfacing for Stabilizer:

HF1000 Crushed tungsten carbide held in a nickel bronze matrix. The 3mm grain size ensures greater concentration of carbide which is ideal for soft formation drilling.

HF2000 Trapezoidal tungsten carbide inserts held in a sintered carbide nickel bronze matrix. This will give a greater depth of carbide coverage -- ideal for high deviation drilling in abrasive formations.

HF3000 Tungsten carbide inserts set in a power spray deposit ideal for abrasive formation. 97% bonding guaranteed, certified by ultrasonic report. Recommended for non-magnetic stabilizers.

TCI Tungsten carbide inserts (button type). The inserts have been developed to allow cold insertion and maintain close fit. A greater concentration of inserts on the bottom third of the blade and leading edge will increase surface contact to reduce wear in highly abrasive formations.

Testing equipment

         

ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.

As the manufacturer, we produce below items:

-DST tools- Full bore retrievable packer, circulating valve, select tester valve,safety valve etc.

-Surface well testing equipment -  Flowhead, SSV, ESD,Separator etc.

-Wellhead equipment such as BOP, X-mas tree, Choke manifold, kill manifold, drilling spool, casing head and other valve & flanges

-Downhole tools such as stabilizer, stabilizer forging, reamer, X-over sub and  etc

As the distributor, we are working with large rig companies and heavy equipment manufacturers for the below products:

-Rig parts from RG,BOMCO,SJ,Hong Hua,KR etc,such as mud pump,rotary table, hook & block, swivel, crown block and consumable parts

- BOP and wellhead parts from Rongsheng,Shenkai

- Pipe- Tubing, Casing, seamless pipe

- Handling tools and Fishing tools

Should any items be of interest to you, contact me freely.

STRING STABILIZER INTEGRAL BLADE STABILIZER