Full Bore Tester Valve 5" Drill stem testing tools

5" Full Bore Tester Valve
Drill stem testing
Cased hole DST

Brief
The Tester valve is a full-opening, annulus pressure operated tool. With applied pressure, the tool can be locked open and then returned to the normal operating sequence at any time. The ball valve operates independently of pressure changes from operations such as acidizing and fracturing. This gives theTester valve greater compatibility and flexibility with other tools in the string.It is fully balanced to annulus pressure and will remain in the closed position while tripping in hole. Operation of the FBTV insensitive to tubing pressure changes

Operation

Once the packer is set, pressure is quickly applied to the annulus to operate the Full Bore Tester valve. This creates the differential pressure that acts across the operating section to move the mandrel down, causing the ball to rotate to the open position. To close the ball, annulus pressure is released to zero. The nitrogen section acts to move the operating mandrel up. This upward travel of the mandrel rotates the

ball valve back to the closed position. To activate the lockout feature, the normal operating pressure is increased by 1,300 psi.

This higher level of pressure prevents the operating mandrel from moving up. In this position, the ball valve will remain open when the annulus pressure is released. To reactivate the tool, annulus pressure is once again increased to 1,300 psi above normal operating pressure. This will reactivate the operating section and return the tool to normal operating mode. The lockout feature can be reactivated as many times as desired without having to remove the tool from the well.

The main parts of the tester valve
Lower metering sleeve                                                                      Ball valve holder
      

      

Special operation tools for tester valve


Test chart of tester valve

ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.

To shorten the delivery time, we proceeded the DST Tools in stock:

Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester

1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set

2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets

3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set

Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.