1/ No oil needed-uses hot air to pop kernels
2/ Providers a healthy alternative for low-fat snack
3/ Removable lid for easy refilling
4/ On/off switch
5/ Special chute helps corn fall directly into your bowl when popped
6/ 110V-120V 60Hz 1200W;220V-240V 50Hz 1200W
7/ Produces puffier popcorn with fewer unpopped kernel
8/ Easy to use and maintain
UNIT SIZE:20.1x20.3x35cm
Gift box size: 38.8x22.8x23.5CM
6PCS POPCORN MAKERS / EXPORT CARTON
Ctn meas:72x40.8x49.1CM
G.W.:10.2 KGS
N.W.: 6.1KGS
The container loading qty of 20'FCL: 1164pcs
The container loading qty of 40'FCL: 2412pcs
The container loading qty of 40'HQ: 2790pcs
This popper is outstanding. It's not as messy as a stir-crazy and probably not as bad for you as microwave popcorn. It can produce great tasting popcorns.
How to use the popcorn maker
USING THE POPCORN MAKER
· Place the Popcorn Maker on a level surface.
· Before first use, it is recommended to wipe the Popcorn Maker and accessories with a damp cloth.
· Measure Popcorn using the Measuring Cup provided. One full measure per session is enough. More than one full measure could overfill the Popcorn Maker and disturb the proper functioning of the Popcorn Maker.
· Pour the Popcorn into the Aluminum Heat Chamber through the CORN-IN-LET.
· Replace the Measuring Cup into position inside the Top Cover after every use.
· Place a large bowl under the Spout so that the edge of the bowl is touching the body of the Popcorn Maker. It is important that the Popcorn ejects down the Spout into the bowl and not re-directed, blocked or otherwise interfered with, since the Popcorn is hot and premature contact may cause minor discomfort.
· Switch On the Popcorn Maker. After a few moments the continuous popping action will automatically feed Popcorn from the Aluminium Heat Chamber out through the
Spout until all has popped. This process will last about 3 minutes.
· Turn off the Popcorn Maker and remove the mains plug from the mains supply when popping has stopped.
· If more Popcorn is required, remove the Popcorn remaining in the Aluminium Heat Chamber. Pay attention not to get burnt when handling the Top Cover as this part as well as the Measuring Cup is very hot when the Popcorn Maker is functioning.
NOTE : Wait for approx. 10 to 12 minutes before using the Popcorn Maker again.
WARNING:
Ÿ Popcorn is usually very dry.
Ÿ Place the Measuring Cup on top of the Top Cover, butter side up.
Ÿ Never put the butter into the Aluminum Heat Chamber.
CLEANING AND MAINTENANCE
· Before cleaning, remove the mains plug from the mains supply.
· Make sure the Popcorn Maker has cooled down completely before cleaning.
· Clean the plastic parts of the Popcorn maker with a damp cloth. Never use abrasive products as they could damage the Popcorn maker.
· The Top Cover and the Measuring Cup can be cleaned in warm soapy water.
STORAGE
When the Popcorn Maker is not in use, disconnect the Popcorn Maker and store in a safe, dry place, out of reach of children.