Hot wire 314 self-stripping Moistureproof waterproof electrical communication wiring connector

Grease filled, protecting against corrosion in damp conditions. Handles 22-14 AWG solid or stranded wire. Self-stripping U contacts for mechanical strength and electrical conductivity. It is recommended to use the crimping tool TP-5940.

This Connector should be used to electrically connect two or three wire ends and insulate the connection.

Wire Range:

This product is to be used for thermoplastic insulated wires.

For use on Solid or stranded, tinned or untinned with wire size of 0,5-1.5 mm2 copper conductors.

This Connnector is Constructed with:

U-contact - Tin plated brass 0,5 mm thick

Insulator - Flame retardant nylon with white clear body and blue cap

 Instructions:

·         Insert 2 or 3 unstripped wires and push these all the way into the end of the connector

·         Double check that the position of the wire is all the way in.

·         Use a crimping tool to push the blue end cap down. It should be flush with the top edge of the connector body.

·         The  connection is now insulated and ready to use.

Technical  Specification:

·         Connector volts: 600 volts maximum

·         For use with common thermoplastic insulated wires:

0.6 mm - 3 amps

0.65 mm - 5 amps

1 mm - 7 amps

1.3 mm - 10 amps

1.5 mm - 15 amps