Name:Hydraulic guillotine shearing machine,Shearing machine,Sheet cutting machine
One.Main features and usages of the machine
1\The machine adopts plate welded construction, eliminate the stress, with good rigidity and stability;
2\Adopts blade clearance adjusting system. It is much fast and easy to adjust it.
3\Rectangular blades with four cutting edges to prolong working life, adjustable shearing angle to reduce deformation of sheet.
4\Upper blade holder has inward tilting structure to facilitate material falling and to enhance working accuracy. Function of shearing in sections and aligning with light.
5\Mechanical back gauge with manual fine tuning, and digital indication.
Two.Parameters:
No | Name | Data | Unit | Remarks |
1 | Max thickness of cutting plate | 20 | mm | |
2 | Max width of cutting plate | 9000 | mm | |
3 | Strength of cutting plate | 450(Q235) | N/mm2 | |
4 | Length of blade | 9560 | mm | |
5 | Cutting angle | 1---3.3° | | |
6 | Number of stroke | 4-15 | min-1 | |
7 | Range of back gauge | 1000 | mm | |
8 | Main motor power | 45x2 | kw | |
Three.Components and constructions of the machine
1\Frame:Plate welded construction, with good rigidity and stability. Two oil cylinders are fixed on the two upper sides of the machine, and drive the blade carrier move up and down. There is secondary blade carrier on the working table for slightly adjusting the lower blade carrier. Also there are balls on the working table, and it makes the operation much easy.
The guider of upper blade carrier is rolling one. And the pre-bending spring fixed on the supporting axis eliminate the guider clearance. It improves the accuracy of the machine.
2\Adjustment of blade clearance
The supporting roller fixed on the blade carrier is eccentric shaft. You can adjust it and let the blade carrier moves forward and backward to adjust the blade carrier.
There is dial fixed on the machine. The dates on the dial are the thickness of the shearing plate. Users can read the numbers on it and choose a correct one.
3\Press cylinder
It consists of a set of cylinders fixed on the beam in the front of the beam. When the oil enters into the pressure cylinder, the pressure head
press down after overcoming the spring, and tighten the plate. It reset by the spring after it shearing the plate. Pressure reduce or increase according to the thickness of the plate.
4\Front and back gauge
Front gauge: It is fixed on the working table, and indicates by ruler. And it can be adjusted by the moveable block on the left and right of the carrier frame to meet the needed values.
Back gauge:
The back gauge device is placed on the lower blade, pull up and down with the upper blade, back gauge adjustment by the electric drive, the gear after the screw drive, block size by the SNC18 device control. Back gauge adjustment range is 20 ~ 1000mm, in this range can be adjusted.
5\Hydraulic system: It consists of control valves, oil pump, oil cylinder, pressure cylinder, return cylinder and so on.
6\Electric: It consists of electric control box, center connecting wires, contreo face plate, motors, foot trample and so on.
7\Main parts of the machine
1 Main electric elements:Siemens;
2 Hydraulic valves: Jining Taifeng, OMG ;
3 Oil pump: Shanghai Chengjie
4Seal rings:VALQUA from Japan;
5.Main motor:Nantong Hengli
8\Display device
It adopts E10S display device;
Back gauge display place X;
Control function specialty
Five.Acceptance standards
National standards:GB/T 14349-93and attached technical files.
Six.Attached technical files
1\Operation manual(Hydraulic principle drawings, Electric principle drawings, Foundation drawings);
2\Certificate;
3\Packing list(Includes attached files).
Seven.Working environment:
1. Temperature: -10+40℃ (Temperature in the oil cylinder can not lower than 10℃)
2. Humidity: ≤80%(+25℃)
3. Power: 220V±10% 50Hz 3ph
Eight.Installation, test, acceptance and after service
1. Seller should inform the buyer to exam the machine in our factory after the machine is finished.
2. Seller should supply corresponding files and foundation drawings in 7 days after confirming the order.
3. If buyer needs the installation, test by seller, then the charges in China will be taken by seller. And charges out of China, such as tickets, and hotels, should be taken by the buyer.