One.Main features and usages of the machine
1\The machine adopts plate welded construction, eliminate the stress, with good rigidity and stability;
2\Adopts blade clearance adjusting system. It is much fast and easy to adjust it.
3\Rectangular blades with four cutting edges to prolong working life, adjustable shearing angle to reduce deformation of sheet.
4\Upper blade holder has inward tilting structure to facilitate material falling and to enhance working accuracy. Function of shearing in sections and aligning with light.
5\Mechanical back gauge with manual fine tuning, and digital indication.
Two.Parameters:
No | Name | Data | Unit | Remarks |
1 | Max thickness of cutting plate | 16 | mm |
2 | Max width of cutting plate | 2500 | mm |
3 | Strength of cutting plate | 450(Q235) | N/mm2 |
4 | Length of blade | 2600 | mm |
5 | Cutting angle | 0.5---2.5° |
6 | Throat depth | 125 | mm |
7 | Number of stroke | 9-20 | min-1 |
8 | Range of backgauge | 800 | mm |
9 | Main motor power | 22 | kw |
Three.Components and constructions of the machine
1\Frame:Plate welded construction, with good rigidity and stability. Two oil cylinders are fixed on the two upper sides of the machine, and drive the blade carrier move up and down. There is secondary blade carrier on the working table for slightly adjusting the lower blade carrier. Also there are balls on the working table, and it makes the operation much easy.
The guider of upper blade carrier is rolling one. And the pre-bending spring fixed on the supporting axis eliminate the guider clearance. It improves the accuracy of the machine.
2\Adjustment of blade clearance
The supporting roller fixed on the blade carrier is eccentric shaft. You can adjust it and let the blade carrier moves forward and backward to adjust the blade carrier.
There is dial fixed on the machine. The dates on the dial are the thickness of the shearing plate. Users can read the numbers on it and choose a correct one.
3\Press cylinder
It consists of a set of cylinders fixed on the beam in the front of the beam. When the oil enters into the pressure cylinder, the pressure head
press down after overcoming the spring, and tighten the plate. It reset by the spring after it shearing the plate. Pressure reduce or increase according to the thickness of the plate.
4\Front and back gauge
Front gauge: It is fixed on the working table, and indicates by ruler. And it can be adjusted by the moveable block on the left and right of the carrier frame to meet the needed values.
Back gauge:
The backgauge device is placed on the lower blade, pull up and down with the upper blade, backgauge adjustment by the electric drive, the gear after the screw drive, block size by the SNC18 device control. Backgauge adjustment range is 20 ~ 800mm, in this range can be adjusted.
5\Hydraulic system: It consists of control valves, oil pump, oil cylinder, pressure cylinder, return cylinder and so on.
6\Electric: It consists of electric control box, center connecting wires, contreo face plate, motors, foot trample and so on.
7\Main parts of the machine
1 Main electric elements:Siemens;
2 Hydraulic valves: Jining Taifeng, OMG ;
3 Oil pump: Shanghai Chengjie
4.Seal rings:VALQUA from Japan;
5.Main motor:Nantong Hengli
8\Display device
It adopts SNC18 display device;
Backgauge display place X;
Control function speciality
Four.SNC18 technical description
1 When the screw exists transmission gap , it can automatically compensate by parameter setting backlash;
2 The system has a soft limit function;
3 built-in dedicated time relay;
4 position memory automatically when power;
5 according to the screw pitch, gear ratio, to set the display scale factor, it also can through teaching operate functions displayed by the numerical control system automatically calculates the scale factor;