FRDK reinforced sleeve for directional drilling
20.0~50.0 USD
| Min. Order: | 100 Set/Sets |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 2000 Set/Sets / Day |
| Place of Origin: | Guangdong |
Company Profile
| Location: | Guangzhou, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Heat Shrinkable Sleeves For Telecommunication, PET, Pipeline Anticorrosion |
Product Detail
| Model No.: | FRDK |
|---|---|
| Means of Transport: | Ocean, Air |
| Burst Strength: | ≥2000N |
| Dielectric Strength: | ≥25 MV/m |
| Tensile Strength: | ≥17 MPa |
| Elongation at Break: | ≥400% |
| Production Capacity: | 2000 Set/Sets / Day |
| Packing: | according to customer requirements |
| Delivery Date: | 10-30 days |
Product Description
FRDK is a high performance fiberglass reinforced sleeve specifically designed for girth weld corrosion protection on pipes used in directional drilling applications.
Construction: three-layer system
First layer: liquid epoxy, solvent-free, two-component
Second layer: high shear strength hot-melt adhesive
Third layer: radiation cross-linked, high density polyethylene, fiber reinforced composite structure.
Additional component: Wear Cone as extra protection against pull-through forces, of the same construction as the main sleeve.
The FRDK system provides effective protection against abrasion and wear forces that occur during the pull-through operation. The system is fully compatible with cathodic protection systems, resists cathodic disbondment and is designed for a wide range of operating temperatures.
Features:
Superior cathodic disbondment and hot water immersion resistance.
Highly resistance to shear and peel forces induced by soil and thermal movement.
Easy to apply with minimal training
Superior abrasion resistance
Excellent adhesion performance
Preheat requirement for product installation
Application
---Oil & gas pipelines for directional drilling
---Water pipelines for directional drilling
---Compatible line coating: PE, FBE, Coal Tar
Properties | Requirements | Test Method | |||
Backing | |||||
Burst Strength (N) (Fibre re-inforced sleeve) | ≥2000 | EN 12068 | |||
Heat Aging (150oC,168h) (Fibre re-inforced sleeve) | ≥1700 | EN 12068 | |||
Dielectric Strength (MV/m) | ≥25 | ASTM D 149 | |||
Environmental Stress Cracking (F50) (h) (10%Co630, 50±2oC) | ≥1000 | ASTM D 1693 | |||
Tensile Strength (MPa) | ≥17 | ASTM D 638 | |||
Elongation at Break (%) | ≥400 | ASTM D 638 | |||
Chemical Resistance (168h) (N) | 10%HCl | ≥85 | ASTM D 638 | ||
10%NaCl | ≥85 | ASTM D 638 | |||
10%NaOH | ≥85 | ASTM D 638 | |||
Volume Resistivity (Ω·m) | ≥1×1013 | ASTM D 257 | |||
Adhesive | |||||
Ring & Ball Softening Point (oC) | ≥90 | ASTM E 28 | |||
Lap Shear (MPa) (23±3oC) | ≥1.0 | EN 12068 | |||
Sleeve | |||||
Holiday Test (kV) | 15 | EN 12068 | |||
Peel Strength (23±2oC) (N/cm) | PE/PE PE/Primer Steel PE/FBE | ≥70 ≥70 ≥70 | ASTM D 1000 | ||
Peel Strength (50±2oC) (N/cm) | PE/PE PE/Primer Steel PE/FBE | ≥15 ≥15 ≥15 | ASTM D 1000 | ||
Indentation Resistance (mm) | ≥0.6 | EN 12068 | |||
Impact Strength (23±3) (J) | ≥15 | EN 12068 | |||
Cathodic Disbonding Resistance (mm) (23±3oC) | ≤20 | EN 12068 | |||
Hot Water Immersion (120d, 65oC) | No delaminating, no blisters or water ingress | ASTM D 870 | |||
Product Specifications
specification | Circumferential length of sleeve | Closure patch width | Wear cone width |
FRDK159*500-1.5/1.0 | 680 | 100 | ≥150 |
FRDK219*500-1.5/10 | 900 | 120 | ≥150 |
FRDK273*500-1.5/10 | 1070 | 120 | ≥150 |
FRDK325*500-1.5/10 | 1260 | 120 | ≥150 |
FRDK355*500-1.5/10 | 1360 | 120 | ≥150 |
FRDK426*500-1.5/10 | 1600 | 150 | ≥200 |
FRDK508*500-1.5/10 | 1900 | 150 | ≥200 |
FRDK529*500-1.5/10 | 1940 | 150 | ≥200 |
FRDK610*500-1.5/10 | 2220 | 200 | ≥200 |
FRDK711*500-1.5/10 | 2560 | 200 | ≥200 |
FRDK813*500-1.5/10 | 2880 | 200 | ≥250 |
FRDK1219*500-1.5/10 | 4180 | 200 | ≥250 |
The above data is normal size .We can produce special size according to the customer's demand.