The Push-Fit Connectors make splicing MicroDuct fast and easy. Simply push the MicroDucts into the center of the coupling. No tools are required. The coupler can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.
Push-Fit MicroDuct connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1CC/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).
Feature:
Material: Clear PC
Leakage Pressure: 15bar
Negative Pressure: -750mmHg(10 Torr)
Proof Pressure: 25bar
Temperature Range: -10 ~ 60ยบ C
For Tubing Type: PE, PU, Nylon, Polyurethane.
| No. | Model No. | For Tube OD(mm) |
| 1 | S03 | 3 |
| 2 | S04 | 4 |
| 3 | S05 | 5 |
| 4 | S06 | 6 |
| 5 | S07 | 7 |
| 6 | S08 | 8 |
| 7 | S10 | 10 |
| 8 | S12 | 12 |
| 9 | S14 | 14 |
| 10 | S16 | 16 |
