Mimaki CJV30-60 Printer/Cutter (24-inch)
Company Profile
| Location: | Indonesia |
|---|---|
| Business Type: | Distributor/Wholesaler |
Product Description
| Model | CJV30-60 | ||||
| Maximum printing width | 610mm (24.0") | ||||
| Print resolution | 540dpi, 720dpi, 1440dpi | ||||
| Print mode | 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | ||||
| 720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi | |||||
| 1,440 x 1,440dpi | |||||
| Ink | Type | Solvent ink: ES3 | |||
| Capacity | 4-colour mode: 440cc cartridge x 2/colour = 880cc/ colour | ||||
| 6-colour mode: 440cc cartridge x 1/colour = 440cc/ colour | |||||
| Media | Width | 620mm (24.4") | |||
| Thickness | Less than 1.0mm | ||||
| Roll weight | Less than 25kg (55lbs.) | ||||
| Roll diameter | Inside: 2 inch, 3inch / Outside: Less than Ø 180mm (7.1") | ||||
| Maximun cutting speed | 30cm 11.8"/s | ||||
| Cutting force | 10-350g | ||||
| Applicable tools | Cutter, Water based ball-point pen, oil based ball-point pen | ||||
| Media cutting | Cutting in the Y direction by the cutter on the head | ||||
| Media heater | Pre / print / post heater | ||||
| Media take-up device | Roll take-up device (Standard) inside, outside selectable | ||||
| Command | MRL-III, MGL-IIc2 | ||||
| Interface | USB 2.0 | ||||
| Applicable standard | VCCI class A, FCC class A, UL60950, CE Marketing (EMC directive, low voltage directive) CB, report | ||||
| Power | AC100~240V, less then 1,380VA | ||||
| Operational Environment | 20ºC ~ 35ºC (64~95ºF), Humidity:35~65%RH (No condensation) | ||||
| Dimentions | W=1,524mm (60") x D=739mm (29.1") x H=1,424mm (56.1") | ||||
| Weight | 110kg (242lbs.) | ||||
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website maybesubject to change without prior notice(for technical improvements,etc).
- The corporate names and merchandise names written on thiswebsiteare the trademark or registered trademark of the respectivecorporations.
- Inkjet printers print using extremely fine dots, so colors mayvaryslightly after replacement of the print heads. Also note that ifusingmultiple printer units, colors could vary slightly from one unittoother unit due to slight individual differences.
