Compared with straight line wire drawing machine, wet wire drawing machine has two notable characteristics. First, in the drawing process, there are varying degrees of relative sliding between the drawing wire and the spool (except finished spool). Second, when the wet wire drawing machine is in operation, wire, spool and wire drawing die are immersed in or be sprayed by cooling lubricating fluid.
Wet wire drawing machine has a broad market for its compact structure, small footprint and high drawing-intensive as well as no torsion in its running time. It is well suited for high speed drawing for good conditions of cooling and lubricating of drawing wires.
While in the drawing process, the relative sliding of drawing wire and the surface of spool consumes much power and abrasive wear of spool surface. Owing to the structure restriction of this wire drawing machine, it is more suitable for drawing wires of smaller diameters.
Wet wire drawing machine is available for drawing mild steel, carbon steel, stainless steel, copper, aluminum and alloys.
Sever types of wet wire drawing machines are provided and each of them has its own features. You can select the right one according to your particular conditions.
- 25 Dies wet wire drawing machine
- Turnover type wet wire drawing machine
- High-speed wet wire drawing machine
25 Dies wet wire drawing machine
Main technical parameters:
- Inlet diameter: Φ 0.9-2.0mm
- Inlet strength: 1350MPa
- Outlet diameter: Φ 0.15-0.41mm
- drawing passes: 25; average unit pressure: 13%
- Max drawing speed: 25m / s
- Motor power: tank - 37KW AC inverter motor and spool - 5.5KW
- Cone pulley: monolithic assembly, surface coating - tungsten carbide , HRC58-62
- Transmission Type: synchronous belt
Application
Available for mild, medium and high carbon steel.
rnover type wet wire drawing machine
Applied in drawing rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.
Technical parameters:
Item | LT21/275 | LT23/280 | LT25/230 |
Drawing drafts | 21drafts | 23drafts | 25drafts |
Max.inlet diameter | Φ1.80mm | Φ1.50mm | Φ1.50mm |
Min.outlet diameter | Φ0.25mm | Φ0.10mm | Φ0.10mm |
Drawing speed | 20m/s | 20m/s | 20m/s |
Motor power | 22KW | 18.5-30KW | 18.5-30KW |
Inlet wire tensile strength | ≤1250Mpa |
Transmission mode | Timing belt, AC frequency inverter control speed |
Capstan production chart | Supersonic spray with WC, service life: 22000 hours |
Cooling system | Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing. |
Tensile strength system | Consist with tight and loose pulley, tensile cylinder is adjustable. |
Arrange wire device | Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire. |
Steel wire linearity | Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable. |
Take up mode | I-spooler take-up |
Control mode | AC frequency invert + PLC + man-machine interface + constant, complete digital logic control |
Drawing materials | Rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc. |
Characteristics:
- Innovation design and rational manufacturing process insures no leak in 3 years.
- Box type welding machine structure, safety and beauty, insure high speed drawing reliable and stable.
- Complete digital logic control, man-machine communication, status display, information service, etc.
- Tension spooling and meter precision make steel wire better linearity.
- Special design and control, satisfied with all kinds of I-spooler take up wire.
Parameters:
Item | LT17/350 | LT17/300 | LT19/250 | LT25/200 |
Drawing drafts | 1 + 17drafts | 1 + 17drafts | 1 + 19drafts | 25drafts |
Max.inlet wire diameter | Φ3.5mm | Φ3.0mm | Φ2.2mm | Φ1.00mm |
Min.outlet wire diameter | Φ0.8mm | Φ0.65mm | Φ0.3mm | Φ0.10mm |
Drawing speed | 10m/s | 12m/s | 16m/s | 20m/s |
Motor power | 6-55KW | 4-55KW | 22-30KW | 15-22KW |
Inlet wire tensile strength | ≤1250Mpa |
Transmission mode | Timing belt and powerful narrow belt, AC frequency inverter control speed |
Capstan production chart | Supersonic spray with WC, axiality<0.025 using life 22000 hour. |
Cooling system | Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing. |
Tensile strength system | Consist with tight and loose pulley, tensile cylinder is adjustable, and assemble double color protect cover. |
Arrange wire device | Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire. |
Steel wire linearity | Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable, slove twisting problem. |
Take up mode | I-spooler take up |
Control mode | AC frequency invert + PLC + man machine interface + constant, complete digital logic control |