Place of Origin: | Zhejiang |
---|
Location: | Beijing, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | NDT Tester |
Model No.: | MDW-E |
---|
Common Configuration Single Arm Electronic Universal Testing Machine For Rubber, Plastic, Textile, Cable
MDW-E Microcomputer control electronic universal testing machine(Common configuration Single arm)
Description:
Microcomputer control electronic universal testing machine is applicable for tensile tests of material like rubber, plastic, textile, waterproofing material, cable, network wire, metal wire, metal rod, metal plate and others. With attaching tools, it can also docompression and bending tests.
Main engine structure
The engine structure is formed by the upper beam, the middle beam, the lower beam and the bottom panel with two pairs of ball
screw-rod and a vertical column. The alldigital AC motor drives the reducer and the synchronic gear belt, so as to turn two pairs of high-precision and seamless ball screw-rod, and to make the beam move up and down.
Specifications:
Main technical parameters |
MDW- |
|||
05 |
1 |
2 |
5 |
|
Structural form |
Single-arm type |
|||
Maximum testing force (KN) |
05 |
1 |
2 |
5 |
Operation mode |
Microcomputer control |
|||
Force measuring range |
2%-100% of the maximum testing force |
|||
Relative error on indicated values of testing force |
Better than ±1%of the indicated value |
|||
Error on deformation display |
±1% (or±0.5%) |
|||
Minimum resolution on the testing force |
0.01N |
|||
Precision on beam displacement |
±1%(±0.5%) ±1% (±0.5%) |
|||
Deformation accuracy |
Better than ±1% (±0.5%) |
|||
Speed governing range |
0.01-500mm/min |
|||
Testing travel |
Less than 600 mm (800mm selected) |
|||
Testing space adjusting mechanism |
Stepping motor or AC servo motor, synchronization with drive |
|||
|
As per GB/T2611 |
|||
Protection function |
Overload protection, limit protection. |
|||
Power supply |
220 V |
|||
|