Copper ore flotation beneficiation plant made by Zhongke

This machine is used for separating ferrous and non-ferrous metals. It can also be used for separating non-metals like coal fluorite and speckstone. The impeller is rotated by V-belt of electric motor and produces centrifugal function resulting in negative pressure. One hand, it sucks into enough air to mix with pulp and fine the foam in order that the mineral can stick on the foam. Then it turns into mineral foam after floating on the pulp. Adjust the height of stopper to control fluid level in order that the available foam can be scrapped out by scrappers.

The flotation machine is driving by the driving band operated by the motor and this mill bring the centrifugation and negative pressure .in this condition ,enough ,air will mix with the slurry and at the same time the slurry and chemical will mix very well to make the mineral adhesion to the bubble.the height of shutter can be adjustment to scapte the usful bubble.

     The floatation machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.

Contact Supplier