GO YEN 2.5" CA62MM RCA62MM pulse jet valve
26.0~42.0 USD
| Min. Order: | 10 Units |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | Paypal, T/T, WU |
| Supply Ability: | 1000 units per week |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | SCG353A047 1 1/2 0.35-0.85Mpa ASCO Pulse Jet Vave, 2 Way Solenoid Valve, 2 SCG353A050 ASCO Diaphragm Impulse Valves |
Product Detail
| Model No.: | CA62MM RCA62MM |
|---|---|
| Means of Transport: | Ocean, Air, Land |
| Power: | Pneumatic |
| Standard or Nonstandard: | Standard |
| Pressure: | Low Pressure |
| Structure: | Diaphragm |
| Material: | Casting |
| Temperature of Media: | Normal Temperature |
| Media: | Gas |
| Brand Name: | Others |
| Production Capacity: | 1000 units per week |
| Packing: | Plastic bags,Boxes,cartons or Customer's request |
| Delivery Date: | within 15 working days after payment |
Product Description
Product Name: GOYEN 2.5" CA62MM RCA62MM pulse jet valve
Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
Pressure Range: 30(5)-860(125) kPA(Psi)
Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C(179.6°F) Viton Seals: -29°C (-20.2°F) to 232°C (449.6°F)
Description
Description
Very high performance diaphragm valve designed to be mounted directly into the compressed air manifold. 1" and 1.5" models are supplied with outlet pipes to length specified, 3" and 3.5"models are supplied without outlet pipes.
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
Construction
Construction
Body and Dresser Nuts: Diecast Aluminium
Ferrule: 304 SS
Armature: 430FR SS
Diaphragm and Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-6 (25 & 40MM standard), Nitrile coated mild steel (76MM standard), or Viton coated mild steel (all sizes)
Refer to Q Series Solenoid product data sheet for solenoid construction details.
Installation
Installation
1. MM valves are installed through the tank, refer to the appropriate template listed above.
2. To avoid any potential operational problems it is preferable that the valves are
not mounted underneath the tank where condensation may collect. All o-rings
should be coated with a silicone based lubricant or similar.
3. Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.
4. Tighten dresser nuts to 20Nm (15 ftlbs) max.
5. Tighten pipe outlets to 20 Nm (15 ftlbs).
6. Connect to pilot valve, if remotely actuated.
7. Ensure compressed air supply is dry and free from oil and dirt.
8. Check all cleaning system components are secure before applying pressure.
9. Apply moderate pressure and check for leaks.
10.Fully pressurise system.
11 .Test fire and listen for proper actuation and crisp pulse noises.