4-IN-1 VAG TOOL KIT

1.VAG DASH COM +CAN

expanded.After a lengthy development phase, we are proud
Our new product to introduce:
VAG vehicles that the new generation.
These are now on the diagnostic socket set.
From the Volkswagen Touran, new combi-tools installed,
only via the CAN-diagnosis can be addressed.
The VAGdashCAN determines the LOGIN and allows an adjustment or recovery of the KM-stand.
A special highlight is the Schlusselanlernungsfunktion.
Pushing a button allows you to teach key
and without waiting 5 minutes
and without that all semi-key must be available.
In addition, some extra features, in everyday life workshop a valuable aid.
This includes, inter alia, the diagnostic capability of each joint in the vehicle CAN controllers.
Now you can order for these vehicles the error memory read and delete.
A valuable extension of your spectrum.

Secure your market advantage, by selecting one of the first to of this exceptional software.

2.VAGDASHCOM
VAGdashCOM is the unique advanced diagnostic tool to read out the internal memory of your Instrument cluster
You can display the login code, recalibrate the odometer and rewrite the EEpromdata in case of changing an instrument.

VAGdashCOM covers up the models 1998-2004 such as:
Golf IV
Passat
Polo 6N
Eurovan T4
Eurovan T5
Skoda
Seat
Audi A3 / A2 / A6
Audi A4 till 2000

3.VAG ECU TOOL

The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.
Read and write access to the EEprom.
Reading the secret odometer (if stored in the engine control unit)
Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU.
With the write function is motor control "cloning" - no need to teach.
Indispensable for workshops, recovery or Chiptuning.

Functions of the program:     
serial EEprom read and save
EEprom checksum checking and correction
IMMO on / off
EEprom from a file and write (clone function)
Read / write access to the login
Read / write access to the chassis number
Read / write access to the Immobilizernummer
Kilometers Motronic in the read and write (if available)    
In the ME7 .** controllers can also perform the following functions:    
Offset channels
Mixture enrichment
Idling torque change
Lambda value
Idle speed change
Correct charge (only for Turbo engines)
Ignition timing change    

supports the following types of motor control of BOSCH:     
EDC15
EDC15VM
EDC15P
EDC15P +   BOSCH ME7.5
BOSCH ME7.5.1
BOSCH ME7.1
BOSCH ME7.1.1   

4\VAG KEY LOGIN

The tool used to determine the login code in many VAG-no speedometer,

Engine ECUs and Immobilizer box. The integrated software make this theperfect tool for the key service Included are the special OBD connectioninterface, USB cable and the software on CD.

Contact Supplier