Customized Hand Pushing Style Centrifugal Industrial Humidifier 0 - 40kg / h

Customized Hand Pushing Style Centrifugal Industrial Humidifier 0 - 40kg / h

Pls note: Votage,Plug,Product words,LOGO,Packing etc can changed as per buyer's requirement.

JS SERIES—Centrifugal humidifier

Distinguishing Deature:

1. Atomize’s movable disc are made of stainless steel and red copper.

2. The ventilating fan is made of stainless steel.

3. Water inlet is use 5mm’s screen, The phenomenon of causes the impurity not to be able to stop up.  

4. Flexible and mobile, fast-humidified, distant atomize spray.

5. Cleaning up wind leaf and electrical machinery dust on regular, keeping it cleaning enough to increase using time.

6. Using sprayed plastic the entire surface treatment, so it’s overall longevity

Heats the main scope of application of the equipment:

The equipment of serial regulation of the humidifier is used in textile,knitting is it spin cloth,clothing,workshop,light textile of trade of printing and dye etc.go on the whole or the part heat,lower the temperature,ventilate and take a breath to having, and can reduce the breaking end rate,dispel static and flying dust,improve the moisture regain.

Structure and Working Principle

Hand-pushing style humidifier is a kind of humidifying facilities which adopts the principle of axial-flow centrifugal atomized technology.It can move quickly on the bases of the requirement in workshops.

Use Condition

Hand-pushing style humidifier is use litmusless of the running water.The Hanging style humidifier’s water-intake pressure is 0.6~3kg/c.

Product Specification:

Installment application method

1.When use the hand-pushing style humidifier, May straight take over the use of the about pairs part the screw to be Fixed. When used to fill water tanks, and puts through the power source, then open the Host computer and water-pump. After switched, can regulate the water supply valve and flow control axial-flow’s size.

2.When mount the Hanging style humidifier, with the expandable steel wire, lives the hanging hook, and ishanging. (In water tank water pump, electrical machinery, rotor all has a powerline)

Maintenance and attention

1.When SD-YD pushes in the type humidifier the water tank anhydrous mustadd water,must after key off the power 

and add water.

2.Use SD - XG mounted humidifier, the inlet water pressure to stay on 0.6-3 kg/c between, can make the normal water supply and spray humidifier, and often clean the bottom of the tank.

3.When in the air dust are more, regularly cleans up the axial-flow's metal mesh dust, the maintenance has the enough air flow, and promptly cleans up on the atomizer the dust, make it a good axial-flow’s actual result.

4.Regular cleaning of the fan motor and dust, keeping it cleaning enough to increase using time.