Higher Corrosion Resistance 0.88T Amorphous Alloy Ribbon Material for AM Labels
Amorphous alloy strip(Nickel-based)
Chemical compasition(percental): Fe.Ni.Mo.B
Applications:
Field sensors
Shielding applications
High frequency cores
Benefits:
Medium saturation induction
Lower magnetostriction
Higher corrosion resistance
Can be annealed for very high DC permeability,rouned or square B-H loops
|
Physical Properties |
Magnetic Properties |
|
Density(g/cm3):7.90 |
Saturation Induction(T):0.88 |
|
Vicker's Hardness(50g load):740 |
Maximum D.C.Permeability(u): |
|
Tensil Strength(Gpa):1-2 |
Annealed:800,000 |
|
Elastic Modulus(Gpa):100-110 |
As Cast:>50,000 |
|
Lamination Factor(%):>75 |
Saturation Magnetostriction(ppm):12 |
|
Thermal Expansion(ppm/):11.7 |
Electrical Resistivity(µΩ.cm):138 |
|
Crystallization Temperature():410 |
Curie Temperature():353 |
|
Continuous Service Temp.():125 |
|
Amorphous alloy strip(Cobalt-based)
Chemical compasition(percental): Co.B
Applications:
Switch-mode power supply applications(magnetic amplifiers;semiconductor noise suppression cores)
High frequency transformers
High sensitivity matching transformers
Ultra-sensitive current transformers
Shielding
Sensor applications
Benefits:
Extremely low core loss
Ultrahigh permeability
High squareness ratio-low coercive force
Near-zero magnetostriction
Excellent corrosion resistance
Can be annealed for linear BH loop
General Properties & Characteristics:
|
ELECTROMAGNETIC |
|
Saturation Induction (T) |
0.57 |
|
Maximum DC Permeability (u): |
|
Annealed (High Freq.) |
1,000,000 |
|
As Cast |
>80,000 |
|
Saturation Magnetostriction (ppm) |
<0.5 |
|
Electrical Resistivity ( .cm) |
|
142 |
|
Curie Temperature (°C) |
225 |
|
PHYSICAL |
|
Thickness (mils) |
0.6 |
|
Standard Available Widths |
|
|
Minimum (inches) |
0.1 |
|
Maximum (inches) |
2 |
|
Density (g/cm3) |
<
|
