Electromagnetic System Lifting Magnet

1. Electromagnetic System 

2. High Pulling Capacity 

3. Easy Operation. 

4. Fast Delivery

1. General Introduction of Electro Lifting Magnet

Lifting Electromagnet is special equipment which utilizes the electric & magnetic physical quantity to lift attached materials and has become indispensable when to lift and transport ferromagnetism materials in lines of metallurgy, mine, machinery, shipbuilding

and transportation, etc., and it can also be used as electromagnetic manipulator, magnetic force centering, bar length fixing and so on in some fields. As the attached materials are diverse, the electromagnet structure, magnetic circuit and manufacturing process are also different, so there are many series of strong targeted products.

2. Features of Electro Lifting magnet

1.magnetic fender is made of rolled Mn plate which has good property of weldablity, magnetism-isolation, wear-resistant and shockproof.

2. Overseas technology has been introduced, improved, innovated, as well as get optimum designed by computer to make our products reasonable structure, light selfweight, strong attraction force and low energy consumption.

3. The energizing coils have been processed by special technology and thus its property of electrical and mechanical gets enhanced, Heat-resistant of insulating material reaches grade C and service life is long.

4. Rated duty cycle of normal electromagnet gets increased from 50% in the past to 60%, thus working efficiency gets improved.

5. Over-High temperature electromagnet adopts unique isolation from heat and radiation, the temperature of attached materials gets increased from 600°C in the past to 700°C, which expands application range of electromagnet.

6. A full set of auxiliary unit such as Control Cubicle, Cable Reel, etc can be provided.

1. Our company has various kinds of products for meeting specific requirement. Please choose the right model according to the following guide.

2. The specification, tonnage, hoist height, brake type of hook, capacity. — should be provided.

3. Choose normal or high or super-high temperature type according to the material's temperature. If below 150°C choose normal type; between 150°C and 600°C high type; above 600°C but with a limit under 700°C, super-high type.

4. Duty cycle: when exceed 60%, choose high frequency type.

5. When operation is in liquid, please choose diving type and provide us with liquid medium and diving depth.

6. Please provide with geometry parameters (such as length, width, depth, diameter and so on.) and number of pieces or bundles to lift when lift section material, sheet material.

PCT:130c ,humidity 100%,vapor pressure 2.7 bar.20 days,average low weight loss less than 2 mg/cm2

Common Applications :

Sensors   Linear actuators   Microphone assemblies    Magnetic separators   DC and servo motors   Speakers   Printers   Magnetic hooksComputer rigid disc drives   Beam controls   Intelligent toys   MRI/NMR

We are specialized in producing NdFeB Magnet over many years,We guarantee the best price based on the same quality and service. Our finance conditiearon and industrial reputation are excellent.

Testing Center

We are ISO/TS16949:2002 certified and well implement all procedures strictly under control. Problem preventive actions and quality assurance are preoperly combined with special inspection for all procedures from raw material purchasing ,outside cooperating part manufacturing,inside manufacturing to shipping . We also install a complete set of physical and chemical test equipment to make sure that all our products are manufactured and shipped under strictly quality control .

Salt Spray Test :

Mainly test the surface treatment against the corrosion.  Usually the tested samples will be  continuous sprayed 24 hours in the 35℃ temperature to see if there is any rust appearance on the surface. 

Projection Instrument:

Mainly test the magnets with irregular shapes such as arc segments and any other irregular-shaped parts to see if their dimensions meet the customers' requirements or not.  

PCT Instrument:

Mainly test the magnets to prevent against corrosion on the high temperature and high atmospheric pressure . Usually the test condition is 120℃ temperature and 2 atmospheric pressure .

Heat& Humidity Instrument:

Mainly test the magnet to against corrosion on certain temperature and humidity . Usually the test condition is 80℃ temperature and 90%+/-3% humidity

Hysteresgraph:

Mainly test the magnetic characteristics of the magnet, including Residual (Br ), Coercive(Hcb) . Intrinsic  Coercive(Hcj), Max. Energy product(BH max) and any other related magnetic parameters. 

HSMAG Magnets has been supplying high quality Neodymium Magnets to customers for about 20 years.

Super Magnet

Made of neodymium, the most powerful magnet material in the world

Great for projects that require extreme strength in a small size

Permanent magnetism guaranteed

Not for children