Sintered NdFeB Magnetic Hook Pot Magnet

magnetic hooks 

1. Stable Performance 

2. Mature Technology 

3. Customized Request. 

4. OEM

magnetic hooks

Item Pot Magnet/ Holding Magnet/ round pot/ Neo pot magnet

Material Metal Pot+Neodymium/Alnico/Ferrite Magnet (According to the pull force demand)

Pull Force 10-1000N, according to your requirement, offer cost-effecitive solution

Advantage 4-year experience in the product, Mature technology, Stable performance

Quantity Sample order are welcomed, MOQ: 2000USD

Application Industrial, House, Holding...

Pot magnets consists of magnet material enclosed in a metal 'pot'. The active magnet face is not enclosed.

The pot is an essential part of the magnetic circuit. The two magnetic poles are concentric and are both on the end face of the magnet.

Pot magnets are the most efficient design for gripping (other designs are preferable for lifting and attracting across air gaps).

1. Which is the strongest type of magnet? 

     Neodymium (more precisely Neodymium-Iron-Boron) magnets are the strongest permanent magnets in the world.

2.  Is one pole stronger than the other? 

      No, both poles are equally strong.

3. What materials can I use to block/shield magnetic fields?

Magnetic fields cannot be blocked, only redirected. The only materials that will redirect magnetic fields are materials that are ferromagnetic (attracted to magnets), such as iron, steel (which contains iron), cobalt, and nickel. The degree of redirection is proportional to the permeability of the material. The most efficient shielding material is the 80 Nickel family, followed by the 50 Nickel family.

4.  Can you supply monopole magnets?

 No, we don't, nor does anyone else, because they don't exist.  All magnets must have at least two poles.

5.  What are neodymium magnets?  Are they the same as "rare earth"?

Neodymium magnets are a member of the rare earth magnet family. They are called "rare earth" because neodymium is a member of the "rare earth" elements on the periodic table. Neodymium magnets are the strongest of the rare earth magnets and are the strongest permanent magnets in the world.

6.  Are your Neodymium Rare Earth Magnets RoHS compliant? 

Yes, our magnets are fully RoHS compliant, meeting the European Parliament Directive entitled "Restrictions on the use Of Hazardous Substances" (RoHS). This Directive prohibits the use of the following elements in electrical/electronic equipment sold after 7/1/2006: cadmium (Cd), lead (Pb), mercury (Hg), hexavalent chromium (Cr(VI)), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs).

PCT:130c ,humidity 100%,vapor pressure 2.7 bar.20 days,average low weight loss less than 2 mg/cm2

Common Applications :

Sensors   Linear actuators   Microphone assemblies    Magnetic separators   DC and servo motors   Speakers   Printers   Magnetic hooksComputer rigid disc drives   Beam controls   Intelligent toys   MRI/NMR

We are specialized in producing NdFeB Magnet over many years,We guarantee the best price based on the same quality and service. Our finance conditiearon and industrial reputation are excellent.

Testing Center

We are ISO/TS16949:2002 certified and well implement all procedures strictly under control. Problem preventive actions and quality assurance are preoperly combined with special inspection for all procedures from raw material purchasing ,outside cooperating part manufacturing,inside manufacturing to shipping . We also install a complete set of physical and chemical test equipment to make sure that all our products are manufactured and shipped under strictly quality control .

Salt Spray Test :

Mainly test the surface treatment against the corrosion.  Usually the tested samples will be  continuous sprayed 24 hours in the 35℃ temperature to see if there is any rust appearance on the surface. 

Projection Instrument:

Mainly test the magnets with irregular shapes such as arc segments and any other irregular-shaped parts to see if their dimensions meet the customers' requirements or not.  

PCT Instrument:

Mainly test the magnets to prevent against corrosion on the high temperature and high atmospheric pressure . Usually the test condition is 120℃ temperature and 2 atmospheric pressure .

Heat& Humidity Instrument:

Mainly test the magnet to against corrosion on certain temperature and humidity . Usually the test condition is 80℃ temperature and 90%+/-3% humidity

Hysteresgraph:

Mainly test the magnetic characteristics of the magnet, including Residual (Br ), Coercive(Hcb) . Intrinsic  Coercive(Hcj), Max. Energy product(BH max) and any other related magnetic parameters. 

HSMAG Magnets has been supplying high quality Neodymium Magnets to customers for about 20 years.

Super Magnet

Made of neodymium, the most powerful magnet material in the world

Great for projects that require extreme strength in a small size

Permanent magnetism guaranteed

Not for children