Cu Plating Rare Earth Neocube Sphere Magnet

Sintered Neodymium Magnet mainly comprised of neodymium ,iron and boron,is the third generation of the rare-earth permanent magnets,Sintered Ndfeb is the strongest permanent magnets in the world up to date,It has excellent properties of high remanence,coercivity,and Max.energy product. Sintered Neodymium Magnet grade N35, N38, N40, N42, N45, N48, N50, N52(Max. Operational temperature: 80c) N35M, N38M, N40M, N42M, N45M, N48M(Max. Operational temperature: 100c) N35H, N38H, N40H, N42H, N45H, N48H, (Max. Operational temperature: 120C) N33SH, N35SH, N38SH, N40SH, N42SH(Max. Operational temperature: 150c) N28UH, N30UH, N33UH, N35UH, N38UH(Max. Operational temperature: Up to 180c) N28EH, N30EH, N33EH, N35EH(Max. Operational temperature: Up to 200c) N30AH, N33AH, N35AH(Max. Operational temperature: Up to 230c) Sintered Neodymium Magnet Outsanding product: 1)high performance:N52,N48M,48SH,42UH,38EH,33AH 2)high working temperature:the AH series with 40 k Oe super-high coervice force can replace SmCo magnets successfully. 3)high consistency:the cpk of Br and Hcj are much higher than 1.67 the consisitency of surface magnetic field and magnetic flux can be controlled with +/-1% 4)High Anti-corrosion:the sale spray test and humid heat test of the high anti-corrosion coating could be more than 1000 hours 5) low weight loss PCT:130c ,humidity 100%,vapor pressure 2.7 bar.20 days,average low weight loss less than 2 mg/cm2 Sintered Neodymium Magnet applications: loudspeakers,motor assemblies,windmill,Home appliance,acousics,communication equipment,toy,car,servomotor,step motor,DC motor and linear motor,mircrophones Pros: Very strong hold when contacting another magnet or plain iron, very difficult to pull away (easy to slide however). Pretty strong hold between two of these even with a couple of mm in between. Cons: Would like thicker (and more powerful) versions. Sure u can stack these together but sometimes it's not the same thing. Other Thoughts: Good for attaching thick stacks of paper to refrigerators etc or pinching together papers or textiles. Bottomline: This is the one if you need strong cost-effective magnet. Our end goal To make friends through business and share success together is our end goal. You are welcome to visit our factory. Samples are available for your test.

PCT:130c ,humidity 100%,vapor pressure 2.7 bar.20 days,average low weight loss less than 2 mg/cm2

Common Applications :

Sensors   Linear actuators   Microphone assemblies    Magnetic separators   DC and servo motors   Speakers   Printers   Magnetic hooksComputer rigid disc drives   Beam controls   Intelligent toys   MRI/NMR

We are specialized in producing NdFeB Magnet over many years,We guarantee the best price based on the same quality and service. Our finance conditiearon and industrial reputation are excellent.

Testing Center

We are ISO/TS16949:2002 certified and well implement all procedures strictly under control. Problem preventive actions and quality assurance are preoperly combined with special inspection for all procedures from raw material purchasing ,outside cooperating part manufacturing,inside manufacturing to shipping . We also install a complete set of physical and chemical test equipment to make sure that all our products are manufactured and shipped under strictly quality control .

Salt Spray Test :

Mainly test the surface treatment against the corrosion.  Usually the tested samples will be  continuous sprayed 24 hours in the 35℃ temperature to see if there is any rust appearance on the surface. 

Projection Instrument:

Mainly test the magnets with irregular shapes such as arc segments and any other irregular-shaped parts to see if their dimensions meet the customers' requirements or not.  

PCT Instrument:

Mainly test the magnets to prevent against corrosion on the high temperature and high atmospheric pressure . Usually the test condition is 120℃ temperature and 2 atmospheric pressure .

Heat& Humidity Instrument:

Mainly test the magnet to against corrosion on certain temperature and humidity . Usually the test condition is 80℃ temperature and 90%+/-3% humidity

Hysteresgraph:

Mainly test the magnetic characteristics of the magnet, including Residual (Br ), Coercive(Hcb) . Intrinsic  Coercive(Hcj), Max. Energy product(BH max) and any other related magnetic parameters. 

HSMAG Magnets has been supplying high quality Neodymium Magnets to customers for about 20 years.

Super Magnet

Made of neodymium, the most powerful magnet material in the world

Great for projects that require extreme strength in a small size

Permanent magnetism guaranteed

Not for children