Small Neodymium Rod Magnets

Neodymium magnet, also known as NdFeB or Neo magnet, is the strongest known type of permanent magnet. Because of their lightweight, strength and the consistency of their magnetization, Neo magnets have become a popular choice for a wide variety of applications, from loudspeakers to magnetic therapy jewelry. A rare earth magnet is made from an alloy of neodymium, iron, and boron. 

Buy Neodymium Magnets

Neodymium magnets entered the marketplace in the 1980s and were always strong – more than 10x stronger than ceramic magnets - but the first neodymium magnets for sale were very expensive. However, improvements in manufacturing processes and other factors have now also made them affordable for everyday use. 

Machining & Magnetization

Unlike other types of magnets, Neodymium magnets have a high resistance to demagnetization. They cannot be formed with conventional drilling, turning or milling processes, and must be ground before they are magnetized. Additionally, large or complex assemblies are usually magnetized prior to assembly. Standard tolerances for Neo magnets are +/-.005 for ground dimensions. They require extremely high magnetizing fields and particular consideration must be given to this when designing complex assemblies. A Neodymium magnet can be magnetized in any direction as long as it is aligned properly. In some instances multiple pole magnetization is not possible; when it is possible, special fixtures are required. 

Temperature Considerations

A low coercivity grade Neodymium magnet may begin to lose strength if heated above 176°F (80°C). High coercivity grade Neo magnets have been developed to function at temperatures up to 428°F (220°C) with little irreversible loss. The need for low temperature coefficient in neodymium magnet applications has triggered several grades to be developed to meet specific operating requirements. Please refer to our chart of magnetic properties to compare the characteristics of each grade. 

Corrosion Protection

While today's Neo magnets are more temperature and corrosion-resistant, a protective coating is still necessary for certain applications. 

Applications

Neodymium magnets have replaced Alnico and ferrite magnets in many applications where strong permanent magnets are required, because their greater strength allows the use of smaller, lighter magnets. 

These applications include: 

•head actuators for computer hard disks

•magnetic resonance imaging (MRI)

•magnetic guitar pickups

•loudspeakers and headphones

•magnetic bearings and couplings

•permanent magnet motors

•cordless tools

•servo motors

•lifting and compressor motors

•synchronous motors

•spindle and stepper motors

•electrical power steering

•drive motors for hybrid and electric vehicles

•actuators

We are specialized in producing NdFeB Magnet over many years,We guarantee the best price based on the same quality and service. Our finance conditiearon and industrial reputation are excellent.

Testing Center

We are ISO/TS16949:2002 certified and well implement all procedures strictly under control. Problem preventive actions and quality assurance are preoperly combined with special inspection for all procedures from raw material purchasing ,outside cooperating part manufacturing,inside manufacturing to shipping . We also install a complete set of physical and chemical test equipment to make sure that all our products are manufactured and shipped under strictly quality control .

Salt Spray Test :

Mainly test the surface treatment against the corrosion.  Usually the tested samples will be  continuous sprayed 24 hours in the 35℃ temperature to see if there is any rust appearance on the surface. 

Projection Instrument:

Mainly test the magnets with irregular shapes such as arc segments and any other irregular-shaped parts to see if their dimensions meet the customers' requirements or not.  

PCT Instrument:

Mainly test the magnets to prevent against corrosion on the high temperature and high atmospheric pressure . Usually the test condition is 120℃ temperature and 2 atmospheric pressure .

Heat& Humidity Instrument:

Mainly test the magnet to against corrosion on certain temperature and humidity . Usually the test condition is 80℃ temperature and 90%+/-3% humidity

Hysteresgraph:

Mainly test the magnetic characteristics of the magnet, including Residual (Br ), Coercive(Hcb) . Intrinsic  Coercive(Hcj), Max. Energy product(BH max) and any other related magnetic parameters. 

HSMAG Magnets has been supplying high quality Neodymium Magnets to customers for about 20 years.

Super Magnet

Made of neodymium, the most powerful magnet material in the world

Great for projects that require extreme strength in a small size

Permanent magnetism guaranteed

Not for children