Brief introduction
To make equipment normalized on locomotive operating board, coordinate the configuration,
according to human engineering principle and relative technical laws and regulations by Ministry
of Railways, research and develop ZDY1 type pressure gauge, audio booth combination module.
ZDY1 type pressure gauge, audio booth combination module (hereinafter referred to as
pressure module) is composed of locomotive double-pointer pressure gauge, audio booth, digital
display meter, which is installed to locomotive operating board to display locomotive operating
data, equipment operative condition and relative information especially for engine driver. It adopts
combination module structure, with advantage of convenient installation, visual display, sturdy
design, safe reliability.
Function
Measure and display pressure of locomotive checking cylinder, main air reservoir, train pipe,
equalizing reservoir.
Display operating condition of locomotive equipment.
Voice prompt various equipment condition when locomotive operation.
Adopt push-stem four-screw to fix and installation.
Main technical data
Technical data of pressure module is made up of those of dual-point pressure gauge, audio
booth, status indicator and digital display meter.
Main technical data of dual-point pressure gauge
a) Range:0~1000kpa;0~1200kpa;0~1600kpa
b) Accuracy:Grade 1.5
c) Input method:dual-pipe input, dual-point indication
d) Environmental conditions:-40℃~+70℃,relative humidity: not greater than 95%
e) Lighting voltage:DC24V±20%;or DC110
f) Insulation resistance:≥5M?
g) Protection property:dust prevention
Main technical data of audio booth
Refer to audio booth technical data provided by
Main technical data of status indicating lamp
a) Status indicating lamp adopts LED luminotro
b) Working voltage: DC24V±20% or DC110V±
Main technical data of digital display meter
a) 2 1/2 digital display accuracy: 99.9±1 word
b) Lightening color:green
c) Input current:0-10mA or 4-20 mA
d) Working voltage:DC5V
The definition of connector and wiring
Connection mode of pressure gauge
Connection mode of audio booth
Refer to Audio booth operating instruction manual in locomotive cab
Connection mode of status indicating lamp
No polar socket connection, pay attention to working voltage value
Module lightening connection
Lightening connection directly connect one of lightening terminal of pressure gauge in
pressure gauge module (other terminal has been connected).
Installation and outline dimensions (See diagram 1)
Installing dimensions of pressure gauge module:265mm×180mm
Outline dimensions of pressure gauge module:280mm×250mm×160mm
Installing hole:4-Ф5.5(counterbore)
Operating method
Before installation, check terminal A of audio booth if in terminal I of module, terminal B of
audio booth if in module terminal Ⅱ(except for SS3B, SS4, DF5).
Then connect the wires of lightening terminal, audio booth, status indicating lamp plug of
pressure gauge, connect air supply pipe and pressure gauge (connect plug if have pressure digital
gauge), then push pressure gauge module into installation hole on working platform, tighten fixing
screw.
Connect power supply and airing after check wiring well, check air pipe if leakage or not,
device indication if normal or not.
The product can be delivered and used after passing several tests.
Application notice
a) Tighten the locking screw when install the socket.
b) The gauge module has the capacity of 120% overload, but the upper limit value in dial
should not be exceeded.
c) Every 3~6 months the pressure module has to be checked in order to ensure the accuracy
and the quality of indicator light.
d) Pay attention to dust-proof, damp-proof, and quake-proof for pressure module when not
using. The module should be kept in storeroom with ambient temperature 0~40℃ and relative
humidity 85%, keeping away from caustic and hazardous gas and substance. If not use the module
for over three months, it should be electrified each three months in order to keep the performance
of electric components during effective storage life.
e) The guarantee of pressure module is 12 months from ex-work. If quality found during this
period, and not seal it off, the seller is responsible for repairing or replacing it free of charge.
