NE series chain bucket hoist
| Place of Origin: | Shandong |
|---|
Company Profile
| Location: | Weifang, Shandong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Conveyor, Hoister, Mixer, Feeder |
Product Description
NE series Chain bucket Hoist Overview:
NE series Chain bucket Hoist widely used for powder, granule, small block abrasion or abrasion-free conveying of materials, such as raw material, coal, limestone, clay, cement, clinker, All the materials should below 250 ℃ .This series adapt flown feeding,material into the hopper and then to the top, unloading of materials upon the gravity itself ,the .Main technical parameters under the mechanical Department standard (JB3926-85) ,Due to the energy saving and high efficiency, NE series Chain bucket Hoist is gradually replacing HL type bucket hoist.The Chains are highly quality .
Product Characteristic:
1, the seal is good, less environmental pollution.
2, easy operation and maintenance,
3, due to the energy-saving and less maintenance, cost is very low.
4, reliable operation, advanced design principles, ensure the reliability of the machine running, good sealing, less environmental pollution.
5, structural rigidity and high precision.
6, small mechanical dimensions
7, large transmission capacity, the series has a variety of specifications.such as NE15~NE800
StructureCharacteristic:
NE series Chain bucket Hoist Were constituted by running parts, devices, device in the upper, middle device, lower device.
1, upper device: install tracks (double ), preventing the chains swing, backstop, preventing the hopper rotation, The port for loading is equipped with rubber ,preventing the materials return.
2, the middle section: part of the middle section is equipped with tracks (double-row) to prevent the chain swings, part of the middle section is equipped with access door for maintenance.
3, lower installation: installing the tensioner, NE15~NE50 adapt spring tension,HNE100~HNE800 adapt hammer tension.
4, upper and lower sprockets adapt ZG310-570.
5, Chain adapt 45#HRC36~42.
a,The chain running low failure rate, long service life;
b, with a lower chain speed (0.5 m/s);
C, using large-capacity hopper and smaller hopper space, lower power and large transport capacity, which is particularly adapt to limestone and cement clinker (≥ NE50).
Characteristic:
1,Adapting feeding, and the parts of the conveyor and the material without extrusion and collision, stable operation, convenient maintenance.
2 ,chain life could maintain more than five years.
3, As adapting feeding, gravity-induced unloading.
4, highly work rate, fault-free operation ,more than 30,000 hours.
NE series Chain bucket Hoist widely used for powder, granule, small block abrasion or abrasion-free conveying of materials, such as raw material, coal, limestone, clay, cement, clinker, All the materials should below 250 ℃ .This series adapt flown feeding,material into the hopper and then to the top, unloading of materials upon the gravity itself ,the .Main technical parameters under the mechanical Department standard (JB3926-85) ,Due to the energy saving and high efficiency, NE series Chain bucket Hoist is gradually replacing HL type bucket hoist.The Chains are highly quality .
Product Characteristic:
1, the seal is good, less environmental pollution.
2, easy operation and maintenance,
3, due to the energy-saving and less maintenance, cost is very low.
4, reliable operation, advanced design principles, ensure the reliability of the machine running, good sealing, less environmental pollution.
5, structural rigidity and high precision.
6, small mechanical dimensions
7, large transmission capacity, the series has a variety of specifications.such as NE15~NE800
StructureCharacteristic:
NE series Chain bucket Hoist Were constituted by running parts, devices, device in the upper, middle device, lower device.
1, upper device: install tracks (double ), preventing the chains swing, backstop, preventing the hopper rotation, The port for loading is equipped with rubber ,preventing the materials return.
2, the middle section: part of the middle section is equipped with tracks (double-row) to prevent the chain swings, part of the middle section is equipped with access door for maintenance.
3, lower installation: installing the tensioner, NE15~NE50 adapt spring tension,HNE100~HNE800 adapt hammer tension.
4, upper and lower sprockets adapt ZG310-570.
5, Chain adapt 45#HRC36~42.
a,The chain running low failure rate, long service life;
b, with a lower chain speed (0.5 m/s);
C, using large-capacity hopper and smaller hopper space, lower power and large transport capacity, which is particularly adapt to limestone and cement clinker (≥ NE50).
Characteristic:
1,Adapting feeding, and the parts of the conveyor and the material without extrusion and collision, stable operation, convenient maintenance.
2 ,chain life could maintain more than five years.
3, As adapting feeding, gravity-induced unloading.
4, highly work rate, fault-free operation ,more than 30,000 hours.