| Features | |
| Structure | Hot dipped galvanized steel+ Anodized Aluminum |
| Module mounting area | Maximum 100 m2 |
| PV peak power | Maximum 15 KWp |
| Tracking method | PLC initiated drives |
| Wind protection system | Programmable; automatic horizontal position at wind speeds greater than 20m/s.
|
| Tracker height | 1.0m, from the ground (horizontal position) |
| Total weight | 900kg, without modules and foundation |
| Foundation | 1.0 m3 reinforces concrete |
| Tracking Axis | 1 axis: azimuth and vertical |
| Angle of rotation | Azimuth: -600 ——600 |
| Azimuth rotation | Linear actuator drive by PLC and motor |
| Power supply to motors | 110 to 480V there phase, 50-60 HZ, depending on location (U.S, Europe etc.) |
| Power usage of motors | 15wh/ day |
| Bearing and turn regulation | Motorized bearing for azimuth tracking activate by planetary gear reducer |
| Electrical cabinets for PLC and electrical security | Metallic, weather tight, fully wired Surge protection for AC |
| Static load | Maximum rated wind speeds is 40m/s. |
| Operating temperature range | -25 to 55℃ |
