LAUNCH X431 PAD DIAGNOSTIC TOOL CIS VERSION

Item

Notes on Improvement

Update Date

Benz Diagnostic Software for X-431 SeriesV45.80

Comparedwith the previous version (V45.76),
1. For every chassis, the non-CAN mode SAM DR,SAM PASS systems have beenadded with read version information, read DTCs, clear DTCs, read datastreams, actuation test, and special functions have been added.
2. For the newly-added ID of mesfi system under the 169 and the 245 chassis,the actuation test and special functions have been added.
3. For the CAN mode ISM under every chassis, the actuation test and specialfunctions have been added.
4. For the non-CAN mode SCM system under every chassis, the Initial startuphas been added.
5. For the 163 chassis, the VIN auto scan function has been improved.
6. For the ESP system under the 211 chassis, the deion of DTC No. 4d41 hasbeen revised.

2012-12-18

JAGUAR Diagnostic Software for X-431 SeriesV18.11

Comparedwith the previous version (V18.10), for following models, specific specialfunctions have been added:
(1) XJ 2006: oil service counter reset, DPF replacement (only for dieselengine), DPF dynamic regeneration (only for diesel engine).
(2) XJ 2008: oil service counter reset, DPF replacement (only for dieselengine), DPF dynamic regeneration (only for diesel engine).
(3) S-TYPE 2006: oil service counter reset, DPF replacement (only for dieselengine), DPF dynamic regeneration (only for diesel engine).
(4) XF 2008: oil service counter reset, DPF replacement (only for dieselengine), DPF dynamic regeneration (only for diesel engine), DPF fuel relatedcomponents replacement (only for diesel engine).
(5) XK 2010: oil service counter reset, oil level reset, read engine oillevel real-time data.

2012-12-18

Chevrolet (SPARK) Diagnostic Software forX-431 Series V17.00

Comparedwith the previous version (V16.00), the domestic B10 UAES engine system hasbeen added.

Note: the latest version of display software shall be used to ensure thenormal operation of diagnostic software.
Regarding the specific tested contents for this version, please refer to the'Vehicle Coverage' on X431 website.

2012-12-18

Renault Diagnostic Software for X-431 SeriesV40.80

Comparedwith the previous version
1. For WIND model, the following modes have been added:
(1) one Injection mode
(2) two ABS modes
(3) one UCH mode
(4) one AIR CONDITIONING mode
(5) one Instrument panel mode
(6) one AIRBAG/PRETENSIONERS mode
(7) one SUNROOF CONTROL UNIT mode
(8) two RADIO modes
(9) one MULTIMEDIA INTERFACE mode
(10) one MULTIMED. CONNECTION mode
(11) two VARIABLE P.A.S. modes
2. For WIND model, fourteen systems have been added.
3. For KANGOO MUX model, two Injection modes have been added.
4. For three modes under the PARKING BRAKE system of SCENIC II model, twospecial functions (Save clutch pedal programming, Write clutch pedalprogramming) have been revised.
5. For the models after year 2004 (all systems), the DTCs have been improved.

2012-12-17

AUDI Diagnostic Software for X-431 SeriesV26.31

Comparedwith the previous version (26.30),
1. The operation instructions for VW model coding, basic adjustment, andchannel adjustment match functions have been added.
2. For previous version, the scanning problem and the BUG of DIAGUN softwarehave been revised and optimized.

2012-12-17

Brilliance BMW Special Diagnostic Software forX-431 Series V34.50

Comparedwith the previous version (V34.40),
1. For following models, specific system has been added.
For V5 model:
BM15T engine system: read DTCs, clear DTCs, read data streams, versioninformation, actuation test, read freeze frame, EOL, and write VIN functions.
1.2 For H320 model:
4A91 UAES M7971 enginesystem: read DTCs, clear DTCs, read data streams, version information,actuation test, read freeze frame, and write VIN functions.
Hyundai HPT automatic transmission: read DTCs, clear DTCs, read data streams,version information, actuation test, and refresh functions.
Delphi 7.8 ABS: read DTCs, clear DTCs, read data streams, versioninformation, actuation test, and bleeding mode functions.
Jinheng airbag (Continental ECU): read DTCs, clear DTCs, read data streams,and version information functions.
Jinbei Henglong EPS (KWP2000): read DTCs, clear DTCs, read data streams, andversion information functions.
Brilliance immobilizer (2009-): read DTCs, clear DTCs, read data streams,version information, and programming functions.
1.3 For Jinbei Haise model:
3TZ engine Delphi MT22.1 system: read DTCs, clear DTCs, read data streams,version information, actuation test, read freeze frame, write VIN, and toothlearning functions.
2. For Jinbei Haise H2Lmodel, the communication pin of Bosch airbag system has been revised.

2012-12-17

JAC Specialized Diagnostic Software for X-431 SeriesV21.30

Comparedwith the previous version , the following systems have been added.
1. For Heyue model: 1.8AT UAES immobilizer
2. For Hechang model: Delphi MT80 engine.

2012-12-17

X431austford

Comparedwith the previous version (V25.10),
the PCM Parameter Reset has been optimized.

2012-12-17

CHRYSLER Diagnostic Software for X-431 SeriesV28.02

Thissoftware is issued in 11 language: English, simplified Chinese, traditionalChinese, Spanish, French, Korean, Portuguese, German, Arabic, Italian, andTurkish.

Compared with the previous version (V28.01),
1. For the 2011 newly added systems under CAN protocol, the actuation test,system test, and special functions have been added to twenty-six sub modes(including ABS, ACC, AHBM, AHLM, DMRL, DMRR, ESM, HSM, HVAC, ITM, MSMD, PEM,PLGM, PTS, RADIO, SAS, TCM, and TPM, etc.).
2. For the 2011 newly added systems, the way to read DTCs has beenreadjusted.
3. The mode matching function has been adjusted, which can accurately accessthe sub mode of system.

2012-12-14

BMW Diagnostic Software for X-431 SeriesV45.70

Thissoftware is issued in 16 languages: simplified Chinese, traditional Chinese,English, German, Spanish, Portuguese, Turkish, Russian, Polish, Italian,Japanese, Arabic, Greek, French, Serbian, and Korean.

Compared with the previous version (V45.60),
1. Following specific functions have been added.
(1) For the DME under the E60, etc., chassis: Idle speed, Exhaust-gasrecirculation, Starting fuel delivery, Limitation delivery, Injection rate,DME/DDE-CAS, Injector rate adjustment, Read measured values, Bleeding, fuelsystem, Replacement, and particulate filter, etc., special functions.
(2) For the CAS under the E60 chassis: CAR KEY MEMORY.
2. The following contents have been improved:
(1) For the DME under the E60, etc., chassis: Read measured values (specialfunction)
(2) For the EGS, DDE, and MRS under the E46 and E39, etc., chassis: readDTCs, and clear DTCs functions
(3) For the FRM, FKA, and ECALL under the F01 chassis: read DTCs function
(4) The text libraries in Russian, French, Arabic, Italian, Japanese, Korean,German, simplified Chinese, and traditional Chinese.
(5) The Chinese icons of 3GIII

2012-12-7

GM Diagnostic Software for X-431 SeriesV42.60

Thissoftware is issued in 12 languages: simplified Chinese, traditional Chinese,English, Korean, Spanish, German, French, Arabic Russian, Italian, Japanese,and Turkish.

Compared with the previous version (V42.50),
1. For following specific models, every system has been added with basicdiagnostic functions.
(1) 2010 Camaro
(2) 2011/2012 Orlando
(3) 2011 Chevrolet Equinox
(4) 2012 GMC Terrain
(5) 2012 Buick LaCrosse/Regal/Verano
(6) 2008/2009 Chevrolet HHR(Europe)
(7) 2012 Chevrolet Aveo
(8) 2012 Cadillac SRX
2. For 2006 Cadillac SRX model, the Brake Pedal Position Sensor Relearnfunction has been added.

2012-12-7

Citroen Diagnostic Software for X-431 Series V40.50

Thissoftware is issued in 16 languages: simplified Chinese, traditional Chinese,Italian, Spanish, German, English, Polish, French, Greek, Portuguese, Korean,Farsi, Turkish, Arabic, Russian and Serbian.

Compared with the previous version (V40.46),
1. For C5, C5 R, C5(X7), C6, C4 PICASSO, and Dispatch 3 models, theSUSPENSION system has been added with read version information, read DTCs,clear DTCs, data streams, actuation test, and matching functions.
2. For Citroen models, the DPF function has been added to forty-five dieselengines.
3. The text library in Spanish has been updated.
4. The Diagun III product support has been added.
5. For C4 model, the Specific operation for maintenance and part replacementfunctions have been added to 9HZ(FAP)BOSCH EDC16C34 DV6TED4 system.
6. For C4/C4 PICASSO/C5 R/C5 (X7)/C6/C8 CAN models, the matching function hasbeen added to Auto gearbox AM6 system.
7. For C1 model, the problem that the Power steering system can't be accessedhas been revised.
8. For C2 model, the undefined matching function prompt of Radio system hasbeen revised.
9. For C4 SEDAN model, the undefined data stream name and matching functionprompts of the Telematic RT5 have been revised.
10. For C3 Parking assistance system, the algorithm of read DTCs has beenrevised.
11. For the CAN category of each engine system, the interrupted communicationof Configuration function has been revised.
12. The product icon of X431 PAD has been revised.
13. For C1 model, the engine, ABS, gearbox, etc., eight systems have beenimproved for read version information, read DTCs, clear DTCs, and datastreams functions.
14. For twenty-one models, the BSI system has been added with read versioninformation, read DTCs, clear DTCs, and service lamp reset functions.
15. For the EDC16C34 DV6engine of fourteen models and the EDC16C34 DV4 engine of two models, the Injectorclassification function has been added.
16. For the MDP CONDUCT system of C-QUATRE model, parts of data streams havebeen optimized.

2012-12-7

USA FORD Diagnostic Software for X-431 SeriesV41.70

Thissoftware is issued in 9 languages: simplified Chinese, traditional Chinese,English, Spanish, Korean, Portuguese, Arabic, French, and Russian.

Compared with the previous version (V41.60), the Passenger Seat Weight SensorReZero function has been added to the 2005-2011 Edge, Sable, Expedition,Explorer, F-150, Five Hundred, Mustang, Fusion, and Taurus, etc., fifteenmodels under the System search menu.

2012-11-30