Spherical roller bearing 23248W33
Boundary Dimension: 240×440×160 mm ,Weight: 127kg.
Shape location tolerance should be to current standard.
Spherical roller bearing have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.
Spherical roller bearing are leading in design and can, in addition to high radial loads, accommodate high axial loads acting in both directions.
Spherical roller bearing 23248 W33
The standard range of SKF spherical roller bearings comprises
- open bearings
- sealed bearings
- bearings for vibratory applications.
In addition to the standard range, offers a wide range of special spherical roller bearings adapted for specific applications.
Spherical roller bearings, whose inner rings have two raceway, and outer raceways are spherical. The centers of curvature of outer raceways are also the bearing centers. The bearings possess self-aligning performance, the permissible disalignment angle is 1-2.5 degree, and can be used in certain permanent deflective application.
These bearings are able to carry high radial loads, as well as axial loads at the same time, but not pure axial loads, the axial carrying bearing will be needed if axial loads were higher. The contact between rollers adn raceways are so close, so the friction is higher than cylindrical roller beairngs, and their limiting speed is lower.
The basic types of spherical roller bearings are type C and CA, according to different cages and whether inner rings are with ribs. Type C beairng has inner ring without rib, and use steel pressed cage. type CA bearing has inner ring with two ribs, and adopt machined solid cage.
Spherical roller bearings are especially suitable for applications required heavy or shock loads.
Spherical roller bearings
Spherical roller bearing 23248 W33
1.Open bearings
Spherical roller bearings are produced in several designs, depending on bearing series and size. The differences are
- the arrangement of the floating guide ring as well as
- the design of the inner ring and/or cages,
as described in the following.
C(J), CC--Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring
EC(J), ECC(J)--Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.
CA--One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring
CAF-- As CA, but with a steel cage.
ECA, ECAC-- Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.
ECAF-- As ECA, but with a steel cage.
E-- For bearings with a bore diameter d ≤ 65 mm: Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring
CAFA-- One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring
With some exceptions, all SKF spherical roller bearings are produced with a cylindrical bore as well as with a tapered bore. The tapered bore of bearings in the
- other series have a taper of 1:12, designation suffix K.
Spherical roller bearing 23248 W33
Boundary Dimensions | Basicload ratings | Designations | Mass | LimitingSpeeds |
mm | KN | r/min |
d | D | B | rmin | Cr | Cor | Current | kg | Grease | Oil |
460 | 680 | 163 | 6 | 2460 | 6670 | 23092 | 223 | 400 | 500 |
680 | 163 | 6 | 2460 | 6670 | 23092/W33 | 223 | 400 | 500 |
480 | 650 | 128 | 5 | 2060 | 5000 | 23996 | 162 | 400 | 500 |
650 | 128 | 5 | 2060 | 5000 | 23996/W33 | 162 | 400 | 500 |
700 | 165 | 6 | 2500 | 6440 | 23096 | 231 | 380 | 480 |
790 | 248 | 7.5 | 5200 | 10700 | 23196/W33 | 486 | 300 | 380 |
870 | 310 | 7.5 | 7850 | 14400 | 23296 | 837 | 260 | 340 |
500 | 670 | 128 | 5 | 2100 | 5250 | 239/500 | 135 | 400 | 500 |
720 | 167 | 6 | 2700 | 7180 | 230/500 | 238 | 380 | 480 |
720 | 167 | 6 | 2700 | 7180 | 230/500 W33 | 238 | 380 | 480 |
920 | 336 | 7.5 | 8430 | 15800 | 232/500 W33 | 1020 | 240 | 320 |
530 | 780 | 185 | 6 | 3180 | 8310 | 230/530 | 313 | 340 | 430 |
780 | 185 | 6 | 3180 | 8310 | 230/530 W33 | 312 | 340 | 430 |
560 | 820 | 195 | 6 | 3490 | 9950 | 230/560 | 367 | 320 | 400 |
820 | 195 | 6 | 3490 | 9950 | 230/560 W33 | 365 | 320 | 400 |
920 | 280 | 7.5 | 7100 | 14800 | 231/560 W33 | 757 | 240 | 320 |
600 | 870 | 200 | 6 | 3760 | 10400 | 230/600 | 417 | 300 | 380 |
980 | 375 | 7.5 | 10200 | 21600 | 241/600 | 1079 | 180 | 240 |
630 | 920 | 212 | 7.5 | 4170 | 11500 | 230/630 | 511 | 260 | 340 |
920 | 212 | 7.5 | 4170 | 11500 | 230/630 W33 | 509 | 260 | 340 |
670 | 900 | 170 | 6 | 3700 | 9600 | 239/670 W33 | 317 | 260 | 340 |
980 | 230 | 7.5 | 6865 | 15000 | 230/670 | 657 | 240 | 320 |
980 | 230 | 7.5 | 6865 | 15000 | 230/670 W33 | 655 | 240 | 320 |
710 | 950 | 180 | 6 | 3950 | 10500 | 239/710 | 389 | 240 | 320 |
950 | 180 | 6 | 3950 | 10500 | 239/710 W33 | 387 | 240 | 320 |
1030 | 236 | 7.5 | 6250 | 14900 | 230/710 W33 | 742 | 220 | 300 |
1150 | 438 | 9.5 | 13900 | 30500 | 241/710 W33 | 1802 | 150 | 190 |
800 | 1060 | 258 | 6 | 6240 | 15200 | 249/800 W33 | 638 | 180 | 240 |
1150 | 258 | 7.5 | 8350 | 19100 | 230/800 W33 | 986 | 190 | 260 |
1150 | 345 | 7.5 | 10900 | 26300 | 240/800 | 1246 | 170 | 220 |
850 | 1220 | 365 | 7.5 | 11600 | 28300 | 240/850 | 1398 | 160 | 200 |
1220 | 365 | 7.5 | 11600 | 28300 | 240/850 W33 | 1395 | 160 | 200 |
1220 | 365 | 7.5 | 11600 | 28300 | 240/850 W33/YA1 | 1396 | 160 | 200 |
900 | 1280 | 375 | 7.5 | 12800 | 31500 | 240/900 W33 | 1783 | 150 | 190 |
1000 | 1420 | 412 | 7.5 | 15300 | 38500 | 240/1000 W33 | 2117 | 100 | 140 |
1060 | 1400 | 250 | 7.5 | 9300 | 24400 | 239/1060CA/W33 | 1020 | 100 | 140 |