K 10x13x16 TN Needle roller bearings and cage assemblies

Needle roller bearings, needle roller and cage assemblies

Needle roller and cage assemblies are ready-to-mount, self-contained bearing components. They are an excellent choice for applications that require a very rigid bearing arrangement as well as a high load carrying capacity. If the shaft and housing bore can serve as raceways, needle roller and cage assemblies require minimal radial space.  
      
Standard needle roller and cage assemblies.     

Supplies needle roller and cage assemblies in single row and double row designs. They are characterized by:       
–  a simple and rugged design       
–  accurate guidance of the rollers in the cage pockets       
–  good running performance       

Outer ring for drawn cup needle roller bearings(DC type) is made of cold rolled steel strip accurately formed.
Structure of DC needle roller bearings features space saving and higher capacity.They are suitable for applications with limited space and housing not hard enough to act as raceway. No requirement on axial location when the DC needle roller bearing is pressed into the housing.

In most applications inner ring is not necessary for DC needle roller bearings unless shaft raceway is impractical,standard inner rings for DC to compare with open end DC needle roller bearings, close end DC needle roller bearings are good for sealing at the close end of bearings,operating temperature range for bearings grease lubricated are 20℃ to +120℃.

	Needle roller bearings, needle roller and cage assemblies
	Product information									Tolerances
										Radial internal clearance
										Shafts and housings
	Dimensions			Basic load ratings		Fatigue	Speed ratings		Mass	Designation	Appropriate seal
				dynamic	static	load	Reference	Limiting			Designation
						limit	speed	speed
	Fw	Ew	U	C	C0	Pu
	mm			kN		kN	r/min		kg	-	-
	3	5	7	1,51	1,34	0,134	40000	45000	0,0003	K 3x5x7 TN	-
	3	5	9	1,72	1,63	0,17	38000	43000	0,0004	K 3x5x9 TN	-
	3	6	7	1,42	1,02	0,104	38000	43000	0,0004	K 3x6x7 TN	-
	4	7	7	1,72	1,32	0,137	36000	43000	0,0005	K 4x7x7 TN	-
	4	7	10	2,29	1,9	0,204	36000	43000	0,0007	K 4x7x10 TN	-
	5	8	8	2,29	2	0,212	36000	40000	0,0007	K 5x8x8 TN	-
	5	8	10	2,92	2,7	0,29	36000	40000	0,0009	K 5x8x10 TN	-
	6	9	8	2,55	2,36	0,25	34000	38000	0,0008	K 6x9x8 TN	-
	6	9	10	3,3	3,2	0,345	34000	38000	0,0011	K 6x9x10 TN	-
	6	10	13	3,69	3,15	0,36	34000	38000	0,0019	K 6x10x13 TN	G 6x10x2 S
	7	9	7	1,68	1,83	0,19	34000	38000	0,0006	K 7x9x7 TN	-
	7	10	8	2,81	2,75	0,29	32000	36000	0,0009	K 7x10x8 TN	-
	7	10	10	3,58	3,75	0,415	32000	36000	0,0010	K 7x10x10 TN	-
	8	11	8	3,03	3,1	0,335	32000	36000	0,0010	K 8x11x8 TN	-
	8	11	10	3,8	4,25	0,465	32000	36000	0,0012	K 8x11x10 TN	-
	8	11	13	5,01	5,85	0,67	32000	36000	0,0017	K 8x11x13 TN	-
	8	12	10	4,84	4,75	0,54	30000	34000	0,0020	K 8x12x10 TN	G 8x12x3
	9	12	10	4,4	5,2	0,57	30000	34000	0,0015	K 9x12x10 TN	-
	9	12	13	5,72	7,2	0,815	30000	34000	0,0021	K 9x12x13 TN	-
	10	13	10	4,57	5,7	0,63	28000	32000	0,0016	K 10x13x10 TN	-
	10	13	13	5,94	8	0,9	28000	32000	0,0023	K 10x13x13 TN	-
	10	13	16	6,82	9,5	1,08	28000	32000	0,0029	K 10x13x16 TN	-
	10	14	10	5,61	6,1	0,695	28000	32000	0,0025	K 10x14x10 TN	G 10x14x3
	10	14	13	5,83	6,3	0,72	28000	32000	0,0046	K 10x14x13 TN	G 10x14x3
	10	16	12	7,65	7,2	0,85	28000	32000	0,0055	K 10x16x12 TN	-

Needle roller and cage assemblies

Contact Supplier