E355 E390 E420 E460 low alloy high strength steel plate
| Place of Origin: | Tianjin |
|---|
Company Profile
| Location: | Tianjin, China (Mainland) |
|---|---|
| Business Type: | Trading Company, Service |
| Main Products: | Steel Plate |
Product Detail
| Model No.: | E355 E390 E420 E460 |
|---|---|
| Thickness: | 4mm to 150mm |
| Width: | 1200mm to 4000mm |
| Length: | 3000mm to 18000mm |
| Standard: | En10025 |
| Payment: | T/T, L/C |
| Min Quantity: | 20MT |
| Trade terms: | FOB,CIF,CFR |
| Packageing Details: | International standard |
| Delivery state: | TMCP, Q& T, N, AR, CR, A, Q and N& T |
Product Description
Quality | Chemicalcomposition I%(m /m)I1) | |||||||||||||
C Max | Mn | Si Max | P Max | S Max | Nb3) | V3) | AI (total)3) min | Ti3 | Cr max | Ni max | Mo max | Cu4) max | ||
E355 | DD E | 0.18 0.18 | 0.9-1.6 0.9-1.6 | 0.50 0.50 | 0,030 0,025 | 0,030 0,025 | 0,015-O,O60 0,015-O,O60 | 0.02-0.10 0.02-0.10 | 0,020 0,020 | 0,02 -0.20 0,02 -0.20 | 0.25 0.25 | 0.30 0.30 | 0.10 0.10 | 0.35 0.35 |
E460 | CC DD E | 0.20 0.20 0.20 | 1.O-1.7 1.O-1.7 1.O-1.7 | 0.5 0.5 0.5 | 0,040 0,040 0,040 | 0,040 0,030 0,025 | 0.015-0.06 0.015-0.06 | 0.02-0.2 | 0.02-0.2 | 0.02-0.2 | 0.07 | 1.0 | 0.40 | 0.70 |
Byagreement at the time of ordering, the maximum copper content may be 0.30%(m/m) | ||||||||||||||
Grade | Quality | Specified yield strength ReH(Rp0.2) Min N/mm2 | Rm2 N/mm2 | ||||||||
E<16 | 16 | 35 | 50 | 100 | 125 | e<70 | 70 | 100 | 125 | ||
E355 | DD E | 355 355 | 345 345 | 335 335 | 325 325 | 295 295 | 285 285 | 470-630 | 450-610 450-610 | 440-600 440-600 | 430-590 430-590 |
E460 | CC DD E | 460 460 460 | 450 450 450 | 440 440 440 | 420 420 420 | - 400 400 | 390 390 | 550-720 | 530-700 530-700 | 520-690 520-690 | 510-680 510-680 |
ReH: Upper yield stress; Rp0.2:0.2%proof stress; Rm:tensile strength A:percentage elongation afterfracture on original guage length e:thickness of test piece, inmillimetres. 1)1N/mm2=1MP 2)in the case of wide strip, only theminimum value of the tensile strength range is applicable. 3)Average of three tests: noindividual result shall be less than 70% of the specified minimum averagevalue. 4) The values of impact energy KV arespecifide in both directions(longitudinal and transverse), but unless otherwisestated in the order, verfication is carred out in the longitudinal. | |||||||||||