FeCrAl H13YU4 0Cr13Al4 Mesh
10.0~50.0 USD
| Min. Order: | 50 Kilogram |
|---|---|
| Payment Terms: | L/C, D/P, D/A, T/T, WU |
| Supply Ability: | 4 Tons per Month |
| Place of Origin: | Beijing |
Company Profile
| Location: | Beijing, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Resistance Wire, Resistance Furnace Wire, Nichrome Resistance Wire, Kanthal A Wire, Heat Resistance Wire |
Product Detail
| Means of Transport: | Ocean, Air, Land |
|---|---|
| Application: | Others |
| Type: | Woven |
| Material: | Others |
| Heat Resisting Mesh: | FeCrAl Heat Resisting Mesh |
| Production Capacity: | 4 Tons per Month |
| Packing: | Sealed up with plastic, outside with wooden case |
| Delivery Date: | 3-40days |
Product Description
FeCrAl H13YU4 0Cr13Al4 Mesh
Heanjia Super-metals Co., Ltd. supplies FeCrAl H13YU4 0Cr13Al4 Mesh. FeCrAl H13YU4 0Cr13Al4 Mesh has the characteristics of high resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, especially under the atmosphere containing sulfides, as well as the lower price, it is widely used in industrial electric furnaces, household electrical appliances and far infrared ray devices.
Chemical composition
The chemical composition of H13YU4,% | ||||||||
C | Si | Mn | Ni | S | P | Cr | Ti | Al |
to 0.15 | to 1 | to 0.7 | to 0.6 | to 0.025 | to 0.035 | 12 - 15 | 0.3 | 3.5 - 5.5 |
Properties:
Alloy | 0Cr13Al4 H13YU4 |
Yield strength(MPa) | 580-680 |
Elongation (%) | > 12 |
Density g/cm3 | 7.40 |
·Electrical resistivity (Ωmm2 / m). | 1.25 ± 0.05 |
The highest temperature continuous operation (° C) | 650 |
Melting point (° C) | 1450 |
Thermal conductivity (kJ / m * h * ° C) | 52.7 |
Coefficient of linear expansion (α × 10-6 / ° C) | 4.15 |
Mesh Specification
Wire Mesh | GB/T 5330.1 ; GB/T 17492 ; JB/T 9155 | 0.5-250 mesh/Inch; Thickness: Min0.05mm |
The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.
Packing Process & Transportation
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air or By sea
Other Terms
Minimum Order Quantity | Manufacture Period | Payment Terms | |
100 KG | 10-15 Days (Small Quantity) | 20-40 Days (Mass Quantity) | L/C, T/T, Western Union |
