DS3/RS232/E1/ETH/V.35 Fiber Modem

PDH-based, Global Tech GP6 series Fiber Modem provides conversion between electrical and optical signals and transforms one V.35/Ethernet/E1 signal on Single/Multi Mode Fiber. The user can customize the wavelength, connector and data bit rate, from 64kbps to 2,048kbps.

GP6 can transfer the in-band management info over different optical fiber link, and monitor and control the local and remote end units.

Specification

*    Sophisticated LED indicators.

*    Support N* 64K, N=1~ 32, timeslot multiplexing. In framing mode, the local end can configure the remote end bit rate.

* Provided 3 types of loopback function, as ANA, DIG and REM, easily installation and maintenance.

* V.35 Fiber Modem can interwork with E1 Fiber Modem and Ethernet Fiber Modem directly, and save one E1/V.35 or E1/Ethernet converter cost.

* Standard SNMP management interface can monitor all local and remote end units through IP network.

Technical Parameter

●    Optical Interface

# Wavelength: 850nm, 1310nm, 1550nm

# Optical Fiber: Single Fiber, Dual Fiber

# Transmission Distance: 20/40/60/80/120 km

# Coding: NRZ(Not Return Zero)

# Connector: SC, FC

●   Ethernet Interface

# 10M/100M auto negotiation

# Full/half duplex auto negotiation

# Standard: IEEE 802.3, IEEE 802.1Q (VLAN)

# MAC Address Table: Up to 4096

# Ethernet Buffer: 64MBits SDRAM

# MDI/ MDIX auto negotiation

●   E1 Interface

# Bit Rate: 2.048M bps ±50ppm

# Impedance: 75Ω (Unbalanced), 120Ω (Balanced)

# Connector: BNC(75Ω), RJ45(120Ω)

# Timing Mode: Input E1 signal synchronization

●    V.35 Interface

# Bit Rate: N* 64Kbps, N=1~32

# Connector: DB25

# Connection Mode: DCE/DTE

# Clock: Slave, V.35 Internal Clock, V.35 External Clock.

●    V.24 Interface

# Bit Rate: Synchronous 64K bps, 128K bps

# Electrical Feature: Comply with CCITT V.28

●    Operation Environment

# Working Temperature: -10℃~ 70℃

# Storage Temperature: -40℃~ 85℃

# Relative Humidity: 5%~ 95%, non-condensing

# No corrosive and solvent gas, no dust and heavy EMI

# Power Supply: AC 220V, DC -48V, DC ±24V

# Typical Consumption: Desktop< 5W, Card< 2.5W

# Physical Dimension:

Desktop: 230mm(W)*33mm(H)*155mm(D)

Chassis: 145mm(W)*20mm(H)*210mm(D)