PYZ900 cone crusher manufacturer, professional products

The application of PYZ 900 cone crusher animation crushing machine

Cone crusher is generally used as a secondary crusher in a crushing circuit. Pre-crushed product(usually 3in minus depending on the cone crusher model) is fed through the top of the cone crusher and flows over the mantle. The vertical cone crusher drive shaft ratates the mantle eccentrically below the concave, or bowl liner, squeezing product and crushing it between the mantle and concave. Cone crushers are usually run on belt drives driven by an electric motor or diesel engine. Cone crushers are used extensively throughout the aggregate and mineral processing industry.

Working Principle of PYB cone crusher

Cone crusher crushes materials by the working surface between the movable cone and fixed cone.

So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported

by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and

the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven

by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and

fimbriated gear, and the wheel of the conveyor belt is driven by motor through vbelts. The lower

part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is

a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks

are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the

discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the

width of discharge hole, consequently the output size is determined adjusted.

Features of PYZ 900 cone crusher animation crushing machine

1. Large crushing ratio and high working efficiency.

2. Perfect lubrication device guarantees machine reliability.

3. High quality wear-resistant parts reduce operating cost.

4. Long life and large application.

The crush cone has long distance to bowl liner in every stroke, so the crusher allows more materiel get into the cavity and produces larger yield, and the materiel pass through the cavity more quickly.

Low cost of daily run and maintenance. Choose theright manufacture materiel and structure, prolong the use life; the long crush arm to reduce the load of slip bearing, gear, and shell; the granularity of the product is uniform which reduces the cycle load; the system of cleaning cavity with hydraulic pressure is convenient , save time, low power and distribution in reason

1. Proper selection of crushing chamber for material to be crushed.

2. A feed grading containing proper distribution of the particle size.

3. Controlled feed rate.

4. Proper feed distribution 360° around crushing chamber.

5. Discharge conveyor sized to carry maximum crusher capacity.

6. Properly sized scalping and closed circuit screens.

7. Automation controls.

8. Adequate crusher discharge area


Main technical parameter of PYZ 900 cone crusher animation crushing machine

Diameter : θ900 Max feed size(mm): 60 Dischargeed size(mm): 5-20
Capacity(t/h): 20-65 Power (kw): 55 Speed of eccentric shaft(r/min): 333
Weight(t): 10.2 Overall dimeter (L*W*H)(mm): 3050*1640*2350

Contact Supplier