RUBBER INTERNAL MIXER BANBURY
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, D/P, T/T |
| Supply Ability: | 1 |
| Place of Origin: | Liaoning |
Company Profile
| Location: | Dalian, Liaoning, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Kneader, Internal Mixer, Batch Off, Mixing Mill, Rubber Cutter |
Product Detail
| Model No.: | 50L-270L |
|---|---|
| Means of Transport: | Ocean |
| Brand Name: | DATONG |
| Production Capacity: | 1 |
| Packing: | WOODEN CASE |
| Delivery Date: | 30 |
Product Description
APPLICATION
It is used for mixing and plasticating rubber or plastics.
CONSTRUCTION FEATURE
1. Inside of mixing chamber, drop door and float weight are designed with perimeter drilling type to be cooling (for the rubber) or heating (for the plastics). Rotor is bored sprinkling type for cooling (for the rubber) or heating (for the plastics) which lead to the best effect. For the 50Ldrop door,50Land80Lfloat weight are bored type.
2. Inside of mixing chamber, rotor, float weight, drop door and contact surface of stock are being hardened to ensure sturdy and durable.
3. Rotors are equipped with rolling bearing to ascertain power economization and longer service life.
4. The hydraulic balance type (except 50L) of shaft seal in the rotor is adopted, specific pressure is consistent on the four sealing faces. The sealing effect is reliable, reaching both sealing and minimizing the wearing rate for the sealing ring.
5. Hydraulic driven drop door and locking device are adopted with plug board to maintain reliable sealing and quick opening and closing.
6. The imported advanced PLC controller with "automatic" and "manual" operations is adopted in the electric system.
Main Technical Specification:
Model | X(S)M-50 ´ 40 | X(S)M-80 ´ 40 | X(S)M-120 ´ 40 | X(S)M-160 ´ 40 | |
Total Volume of mixing chamber | L | 50 | 80 | 120 | 160 |
Working capacity of mixing chamber | L | 30 | 60 | 90 | 120 |
Rotating speed of rear rotor | r/min | 40 | 40 | 40 | 40 |
Sped ratio of rotor | 1:1.172 | 1:1.143 | 1:1.15 | 1:1.16 | |
Pressure of compressed air | MPa | 0.6 ~ 0.8 | 0.6 ~ 0.8 | 0.6 ~ 0.8 | 0.6 ~ 0.8 |
Compressed air consume | m3/h | 20 | 30 | 60 | 80 |
Pressure of cooling water | MPa | 0.3 ~ 0.4 | 0.3 ~ 0.4 | 0.3 ~ 0.4 | 0.3 ~ 0.4 |
Cooling water consume | m3/h | 7 ~ 10 | 25 | 27 ~ 45 | 35 ~ 50 |
Steam pressure | MPa | £0.8 | 0.5 ~ 0.8 | 0.5 ~ 0.8 | 0.5 ~ 0.8 |
Steam consume | m3/h | 200 | 300 | 720 | 900 |
Power of driven motor | kw | 95 | 210 | 280 | 450 DC |
Overall dimension (L ´ W ´ H) | mm | 5600 ´ 2700 ´ 3300 | 5930 ´ 2620 ´ 3900 | 7400 ´ 3100 ´ 4230 | 6620 ´ 2640 ´ 4300 |
Weight | t | 14 | 24 | 28 | 32 |
