Attach mobile by 3M stick.
Can charge for mobiles with charging line.
powered by battery inside and adapter.
Unlock the alarm by remote controller.
White ,black colors.
Product Name: display stand for mobile phone
Product Information:
This elegant Security alarm holder for mobile , high practical,greatly promoted the launching of experiential marketing and improvement in performance for security.
Now widely used in various types of mobile phones, cameras, MP4 and other Consumer Electronics products for Mobile phone supermarkets, used for loss prevention security of telecom mobile Unicom, digital city, digital camera counters, GPS counters, MP4 counters, appliances hypermarkets, supermarkets and various small electronic products exhibition of digital
It Upgrade the marketing model from the traditional "tell-style" to the innovative "experiential",consumers select products and convenient services from the staff "recommended style" which facilitate the consumers while improving business performance.
Security alarm holder for mobile are composed of the host alarm system, multi-touch alarm sensor, 3M adhesive and other components.
Simple installation methods, such as installation of alarm installed in display racks or display case, Sensor (alarm probe) adhere to the product
Customers can easily take down from the shelf displays, free to operate and feel the exhibits' features ,function and appearance,If somebody want to take away the display, the alarm will sound a continuous alarm immediately, the alarm will not stopped until the Manager to reset processing
Technical parameter
1.External power adapter: DC5V 1000MA
2.Internal Battery type: 3.7V rechargeable lithium battery.
Function:
1) Host Base with Charging Function, Charging monthly , Repeated use.
2)Installation Method : Double ways in 3mm adhesive or use screws tighten.
3)Disconnection Alarm Function:Three Contacts disconnection alarm
4)Low Voltage Alarm Function :Voltage Less 3.3V Alarm ,remind the charging
5)Short Circuit Alarm Function : circuit is short-circuited ,automatic alarm
6)Infrared Remote Control Function : Remote Start and Disarm the Alarm.
Products installation
1.Clean the display case, then turn on switch on the bottom of Security alarm holder for mobile host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open the screw hole cover firstly)
2.Connect the charger of Security alarm holder for mobile with the alarm host, the other end into the power socket in preparation for a fixed monthly charge.
3.Tear off the 3 adhesive tape from the Anti-Theft Terminal product for display and paste exhibit's back fastened
4.Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product
5.Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key , the host switch on ,enter the preset alarm status
6.The installation is set up
Products list
1 .alarm display security alarm holder/stand host base (with a rechargeable lithium battery inside) 1 pcs.
2, Aalarm sensor probe(with a magnetic back, paste 3M adhesive. Extension cords ) 1 set
3, Operation Manual 1pcs
4, Remote control 1 pcs
5, Additional 3M adhesive and screws 1 set