D10x1 Self adhesive disc Neodymium magnet
0.01~10.0 USD
| Min. Order: | 10 Piece/Pieces |
|---|---|
| Supply Ability: | 1.500.000pcs/Month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
| Main Products: | N35 Ring Neodymium Magnets, Ring Ndfeb Magnets, Magnetic Balls, Promotional Fridge Magnets, N35 Disc Adhesive Magnets |
Product Detail
| Model No.: | N35-N45 |
|---|---|
| Composite: | NdFeB Magnet |
| application: | industrial/packing/daily use |
| shape: | disc |
| type: | permanent |
| brand name: | Honfon |
| Production Capacity: | 1.500.000pcs/Month |
| Packing: | in pair and vacummed,in tube,or as needed |
| Delivery Date: | 10-25days |
Product Description
product name:disc adhesive NdFeB magnet
model no.:N35
size:D10x1
application:industrial/packing/daily use
shape:disc
type:permanent
composite:Nd/Fe/B
brand name:Honfon
Application Techniques:
For maximum bond strength (during installation of the final part) the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane (for oily surfaces) or isopropyl alcohol for plastics.Use reagent grade solvents since common household materials like rubbing alcohol frequently contain oils to minimize the drying affect on skin. These oils can interfere with the performance of a pressure-sensitive adhesive.Consult solvent manufacturers MSDS for proper handling and storage instructions. Also, use disposable wipes, that do not contain oils, to remove the cleaning solvents.
It is necessary to provide pressure during lamination (1.5-20 pli recommended) and during final part installation (10-15 psi) to allow the adhesive to come into direct contact with the substrate. Using a hard edged plastic tool, which is the full width of the laminated part, helps to provide the necessary pressure at the point of lamination.
Heat can increase bond strength when bonding to metal parts (generally this same increase is observed at room temperature over longer times, weeks). For plastic parts, the bond strength is not enhanced with the addition of heat.
The ideal adhesive application temperature range is 70°F (21°C) to 100°F (38°C). Application is not recommended if the surface temperature is below 50°F (10°C) because the adhesive becomes too firm to adhere readily. Once properly applied, at the recommended application temperature, low temperature holding is generally satisfactory (please refer to section VII of the Typical Physical Properties and Performance Characteristics).
1)3m self-adhesive,good quality,various type,like 3m467,3m468,3m9080,3m4945 and so on,3m date sheet
2)can be used on non-metallic surface
3)thanks to a small flap,the protect film of adhesive can be peeled off easily
4)Good quality,reasonable price
Self disc adhesive magnet
model no.:N35
size:D10x1
application:industrial/packing/daily use
shape:disc
type:permanent
composite:Nd/Fe/B
brand name:Honfon
Application Techniques:
For maximum bond strength (during installation of the final part) the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane (for oily surfaces) or isopropyl alcohol for plastics.Use reagent grade solvents since common household materials like rubbing alcohol frequently contain oils to minimize the drying affect on skin. These oils can interfere with the performance of a pressure-sensitive adhesive.Consult solvent manufacturers MSDS for proper handling and storage instructions. Also, use disposable wipes, that do not contain oils, to remove the cleaning solvents.
It is necessary to provide pressure during lamination (1.5-20 pli recommended) and during final part installation (10-15 psi) to allow the adhesive to come into direct contact with the substrate. Using a hard edged plastic tool, which is the full width of the laminated part, helps to provide the necessary pressure at the point of lamination.
Heat can increase bond strength when bonding to metal parts (generally this same increase is observed at room temperature over longer times, weeks). For plastic parts, the bond strength is not enhanced with the addition of heat.
The ideal adhesive application temperature range is 70°F (21°C) to 100°F (38°C). Application is not recommended if the surface temperature is below 50°F (10°C) because the adhesive becomes too firm to adhere readily. Once properly applied, at the recommended application temperature, low temperature holding is generally satisfactory (please refer to section VII of the Typical Physical Properties and Performance Characteristics).
1)3m self-adhesive,good quality,various type,like 3m467,3m468,3m9080,3m4945 and so on,3m date sheet
2)can be used on non-metallic surface
3)thanks to a small flap,the protect film of adhesive can be peeled off easily
4)Good quality,reasonable price
Self disc adhesive magnet
