Wire Rope Hoist FEATURES:
1. Hooks
Loadhooks are heat treated and fracture resistant. In case of dangerousoverloading or abuse, the hook does not fracture but will slowly yield.
2. Power
Operating voltage 220-440V, 50/60Hz, 1-3 phase.
Low voltage control 36V is standard.
Dual voltage is available.
3. Motor
High efficient energy-saving motor, asbestos free brake system. 2-speed motor available.
Sturdy pole change motors with cylindrical rotors and integrated safety brakes.
3. Limit Switch
Limitswitch devices fitted at both top & bottom ends, switch off powerautomatically to prevent load chain from running out.
4. Pushbutton Swith
Pushbutton swith is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked.
5. Hoisting Gear:
Lightweight gear units with silent running flat bevelled gears deliver the torque required.
6.Rope guide:
Therope guide reduces wear on the rope and rope drum. It is also easy toinstall, reducing maintenance requirements for the unit as a whole.
MODEL | CAP. (T) | LIFTING SPEED(M/MIN) | TRAVELLING SPEED(M/MIN) | GROUP ISO | ROPE REEVING | LIFTING MOTOR(KW) | C/mm | A1/mm | A2/mm | B/mm | Hmin/mm | S/mm |
WHL-CA2016 | 1.6 | 8.0/1.2 | 15/5 | M5 | 2/1 | 2.5/0.37 | 100-500 | 378 | 297 | 430 | 917 | 0.0198H |
WHL-CA2032 | 3.2 | 4.0/0.6 | 15/5 | M5 | 4/1 | 2.5/0.37 | 100-500 | 378 | 297 | 430 | 760 | 0.0198H |
WHL-CA3025 | 2.5 | 8.0/1.2 | 15/5 | M5 | 2/1 | 4.9/0.8 | 116-450 | 400 | 329 | 525 | 1014 | 0.0212H |
WHL-CA3050 | 5.0 | 4.0/0.6 | 15/5 | M5 | 4/1 | 4.9/0.8 | 116-450 | 400 | 329 | 525 | 872 | 0.0212H |
WHL-CA4063 | 6.3 | 10/1.6 | 15/5 | M4 | 2/1 | 12.5/2.0 | 142-500 | 475 | 458 | 688 | 888 | 0.0192H |
WHL-CA4125 | 12.5 | 5/0.8 | 15/5 | M4 | 4/1 | 12.5/2.0 | 142-500 | 475 | 458 | 688 | 897 | 0.0192H |