PE PP pre insulation pipe production line

 Basic  brief:

Ⅰ.SJ-90x30 single screw extruder 30:1(international standard) 1set,

Implementation of JB/T8061 2011 standard, Gearbox of hard teeth,automatic lubrication,screw and barrel is treated with 38CrMOALA,high Compression ratio ,high extrusion capacity,nitriding layer depth 0.3-0.7mm,hardness HV900-1000,high wear-resistance and corrosion.matching with frequency converter 37KW energy-saving 37KW,With automatic temperature control cabinet,electrical components are from CHINT brand,with blower cooling.                                                 

Ⅱ. Automatic feeding unit 1set                                    

ⅢHopper dryer 1set                                         

Ⅳ new style spiral head die 1set  In view of the PE jacket plasticization, mould steel forging processing, inner flow polishing treatment        

Ⅴ.mould 3 sets, material is 45# casting steel Blank piece is refined processing and finished  on lathe.                                       

Ⅵ. Pe pipe calibration sleeve: φ100—600                      

Ⅶ. Vacuum box 1set, Φ1000×5000mm.   2sets of 5.5Kw vacuum pump, 2sets 5.5Kw  of circulating water pump ,     automatic moving forward and backward.                                                                              

Ⅷ. Automatic cutting sawer 1set adopting    The man-machine interface of PLC programmable control, automatic moving forward and backward.

Ⅸ, SJG—F600 extended edition four claws haul-off unit 1set,frequency speed adjusting controlling with  4kw motor, NRV75-30 type aluminum shell worm reduction gear,motor clamping,universal joint drive,automatic locking,automatic releasing,newest style of slide block,germany technology,drawing scopeΦ100-600.                                 

Ⅹ. Hold up the pipe rack 12 meters                            

Ⅺ. Heating ring 1 set       

Pe  insulation pipe production line  configuration reference:

effective extrusion of pe insuration pipe prodution line:

pe  insulation pipes: