energy saving injection mould machine
| Min. Order: | 1 Set/Sets |
|---|---|
| Payment Terms: | L/C, T/T |
| Supply Ability: | 100sets/month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | FL360 |
|---|---|
| Means of Transport: | Ocean |
| Brand Name: | FL |
| Camp force(KN): | 3600 |
| Toggle stroke (mm): | 635 |
| Space between tie bars(mm): | 645x645 |
| Max.mould height(mm): | 660 |
| Min.mould height(mm): | 210 |
| Ejector number (pc): | 12+1 |
| Ejector force (KN): | 90 |
| Ejector stroke (mm): | 170 |
| Production Capacity: | 100sets/month |
| Packing: | General Packing |
| Delivery Date: | 10 Days |
Product Description
| FL360 | ||||
| INJECTION UNIT | ||||
| A | B | C | ||
| Screw dimeeter | mm | 65 | 70 | 75 |
| Screw L:D | L/D | 23.7 | 22 | 20.5 |
| Shot volume | cm3 | 1177.8 | 1366 | 1568.1 |
| Injection pressure | Mpa | 181.7 | 156.7 | 136.5 |
| Screw rotate speed | rpm | 144 | ||
| Shot weight PS | g | 1072 | 1243 | 1427 |
| Shot weight PS | oz | 37.814 | 43.846 | 50.336 |
| CLAMPING UNIT | ||||
| Clamp force | KN | 3600 | ||
| Toggle stroke | mm | 635 | ||
| Space betweentie bars | mm | 645×645 | ||
| Max.mould height | mm | 660 | ||
| Min. mould height | mm | 210 | ||
| Ejector stroke | mm | 170 | ||
| Ejector force | KN | 90 | ||
| Ejector number | pc | 12+1 | ||
| OTHERS | ||||
| Die positioning hole | mm | 160 | ||
| Pump pressure | Mpa | 16 | ||
| Pump motor pOwer | KW | 37 | ||
| Heating power | KW | 27.9 | ||
| Oil tank capacity | L | 579 | ||
| Machine weight | T | 12 | ||
| Machine demensions(L×W×H) | m | 6.9×1.8×2.46 | ||
energy saving injection mould machine
Oil motor is to actuate the gear wheel for mold position adjusting, each stretch bar will get equal force, easy and safe to operate.
Central hydraulic ejector system, you can adjust the ejecting stroke through the approaching switch during the stroke scope, also you can set as several times ejector or vibration ejector according to particular condition.
Injection parts is actuated by stepless high torque oil motor for pre-plasticizing.
Double cylinder balance injection.
Four stages injection and three stages pressure holding.
Precision temperature controlling system, resistance heating ring is used for heating barrel, equipped with automatic temperature controller or controlled by PID system in computer, heating is fastly and equally.
High precision potentiometers, three famous brand potentiometers are used for controlling injection, mold moving and ejection respectively, the precision can reach +/-0.1mm.
Storage type automatic grease lubrication system.
Various operation methods: Spot, Manual, Semi-auto and fully-automatic types.
Mechanical and pneumatic safety protection device, the mold closing will not be done until closing the safety door.
Injection molding machine, injection molding machine or injection machine. It is the main forming equipment plastic products, thermoplastic or thermosetting plastics using plastic molding into various shapes. Divided into vertical, horizontal, all electric. The function of heating plastic injection, high voltage is applied to the molten plastic, so that the injection and full of mold cavity
Welcome to my company contact information
