Automatic Facial Tissue Interfolder Machine
Company Profile
| Location: | China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | AF-FT-900 |
|---|
Product Description
This Interfolder unit is used to unwind jumbo tissue raw material rolls, which are then slit to desired width, perforated, and folded using vacuum suction, with the option of various kinds of embossing units equipped with push-pull clutch system as not to damage the rollers when not in use.
Loaded with the latest technology you can easily produce tissues to the desired count using a touch screen Human-Machine-Interface. Various sensors are installed to detect abnormalities, and safely stop the operating machine.We make sure to install the best PLCs in the market to ensure effective and trouble free operation of the machine.
Basic Specifications:
A wide range of options are available upon request, such as: Special embossing units, edge embossing units, special power requirement, and perfume spraying units.
Note: Detailed specifications will be provided upon client request.
Loaded with the latest technology you can easily produce tissues to the desired count using a touch screen Human-Machine-Interface. Various sensors are installed to detect abnormalities, and safely stop the operating machine.We make sure to install the best PLCs in the market to ensure effective and trouble free operation of the machine.
Basic Specifications:
According to customer requirements the Interfolder can be built to desired raw material jumbo roll width, core, and outside diameter. Standard core diameter: 3 inches (7.62 mm), outside diameter of 1100 mm, and widths vary depending on client requirements (up to 1300 mm for the 6 line Interfolder).
Tissue size | Open size210 x (180-220) mm, |
Folded size105 x (180-220) mm | |
Speed | 900 sheets/minute/line |
Slitting unit | Pneumatic dot slitting |
Driving system | Timing belt driving system |
Counting system | Stack by stack alternative counting system |
Controllers | Variable frequency speed controller, HMI, PLC (Mitsubishi or SiemensBrand) |
Jumbo roll loading | Automatic by specialpneumatic air pistons system |
Standard Power supply Requirement* | 3 Phase, 380 volts, 50 Hz. Neutral plus good earth. |
Compressed Air Requirement* | 3 HP with minimum capacity of 4 kg/cm2 |
Main motor power** | 3.5-5.5 KW |
Vacuum system** | 7.5-22 KW |
Dimensions (L x W x H) ** | 500 x 1300 x 1800 – 600 x 2500 x 1900 mm |
Weight ** | 3800-9000 Kg |
*Power and compressed air supplies should be provided by client. **Variable depending on machine size, configuration, and options.
A wide range of options are available upon request, such as: Special embossing units, edge embossing units, special power requirement, and perfume spraying units.
Note: Detailed specifications will be provided upon client request.