SBS/APP modified bituminous waterproof membrane with mineral granules
1.8~3.5 USD
| Min. Order: | 20 Ton |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 40 ton/day |
| Place of Origin: | Hebei |
Company Profile
| Location: | Cangzhou, Hebei, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | SBS/APP |
|---|---|
| Means of Transport: | Ocean |
| Brand Name: | Jianda |
| color: | black |
| specification: | 1m*10m |
| thickness: | 2mm--5mm |
| surface: | PE film, mineral franule, aluminum foil, self,adhesive |
| reinforcement: | PY,G |
| heat reisitance: | 105 deree |
| low temperature flexibility: | -25 degree |
| Standard: | GB18242-2009 |
| material: | SBS |
| usage: | roof underlayment |
| Production Capacity: | 40 ton/day |
| Packing: | packed in rolls with pallet |
| Delivery Date: | within 30 days after receipt of down payment |
Product Description
SBS asphalt waterproof sheet
Describation width(m) length (m) weight (kg/roll) thickness (mm)
SBS modified Asphalt waterproof Membrane 1 10 28 2
SBS modified Asphalt waterproof Membrane 1 10 41 3
SBS modified Asphalt waterproof Membrane 1 8 48 4
SBS modified Asphalt waterproof Membrane 1 10 32 2
with mineral granules
SBS modified Asphalt waterproof Membrane 1 10 43 3
with mineral granules
SBS modified Asphalt waterproof Membrane 1 8 50 4
with mineral granules
SBS modified Asphalt waterproof Membrane 1 10 28 2
with aluminum oil
SBS modified Asphalt waterproof Membrane 1 10 41 3
with aluminum oil
SBS modified Asphalt waterproof Membrane 1 8 48 4
with aluminum oil
Product Characteristics
Good capacity of anti-aging, anti-acid, and anti-alkali, its service life is 30years.
High tensile strength and elongation which adapts to the contraction or crack of the base.
Good perdurable capacity to climate; be used in cold(-25°C)environment for long life.
Applied by torch.
Widely applied in roofing, basement, pool, subway etc.
Construction Requirements Basement Treatment
The waterproofing base should be strong smooth, and clean without particles on the surface. No peeling or cracking shall exist on the surface. The corners of the base shall be made into arcs with a radius of no less than 20mm or triangular. The drain slope, division seam, and air vent shall be carried out and treated according to design requirements. Then brush promer on the foundation until it is dry.
Installation
Place the sheet correctly, fire torch, evenly heat the sheet and foundation ,When the surface of the sheet is black and bright with a fusion layer apply the sheet and press it into a solid and flat state. Before the sheet is cool, seal the edge of joints by float.
Cautions installation is forbidden during rain, snow, fog, strong wind.
The temperature should be 5-35°C during installation.
All nodes should be reinforced during installation.
Keep away from fire during storage.