| MODEL | LR-MWS60 PC1250 | |
| | DC VOLTAGE | 40-56V | |
| | RATED CURRENT | 1.25A | |
| | CURRENT RANGE | 1.25A(max constand current) | | | | |
| | RATED POWER | 60W | |
| | RIPPLE&NOISE | <400mVp-p | | | | | |
| OUTPUT | VOLTAGE ADJ.RANGE(CV Mode) | ±5%(2.5A) | | | | | | |
| | CURRENT TOLERANCE | ±5% | | | | | | |
| | LINE REGULATION | ±2% |
| | LOAD REGULATION | ±2% |
| | HOLD UP TIME(TYPE) | 1s/100VAC at full load |
| INPUT | VOLTAGE RANGE | 90-264VAC |
| FREQUENCY RANGE | 47-63Hz |
| EFFICIENCY(Type) | >85%/115VAC >87%/230VAC |
| | POWER FACTOR | >0.95 |
| ENVIRONMENT | WORKING TEMP | -30~+60℃ |
| WORKING HUMIDITY | 5~95% RH |
| STORAGE TEMP.,HUMIDITY | –40~+85℃.5~95% RH |
| | TEMP.COEFFICIENT | ±0.05% (0~50℃) |
| VIBRATION | 5~500Hz 0.6G(5-50Hz peak-pead)/1.5G (5-50Hz peak-pead),2 hours,each alongX,Y,Zaxes |
SAFETY
&
EMC
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC,5mA 1min |
| ISOLATION RESISTANCE | I/P-O/P:500MR / 500VDC |
| EMI CONDUCTION&RADIATION | Compliance to EN55022 class B |
| HARMONIC CURRENT | Compliance to EN61000-3-2.3 |
| EMS IMMUNITY | Compliance to EN61000-4-2.3.4.5.6.8.11.light industry level criteria A |
| OTHERS | MTBF | 50000hours |
| DIMENSION | 150*80*40mm(L*W*H) |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature |
| 2.Ripple&noise are measured at 20MHZ of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor. |
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. |
| | 4.The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed. |
| that it still meets EMC directives. |
| 5.Derating may be needed under low input voltages,Please check th derating curve for more details. |
.gif)