| MODEL | LR-UPS200 PV5 |
| OUTPUT | DC VOLTAGE | 5V / (4.2V) |
| RATED CURRENT | 40A |
| CURRENT RANGE | 0-40A |
| RATED POWER | 200W |
| RIPPLE&NOISE | 70mVp-p |
| | VOLTAGE ADJ.RANGE | 4.9-5.1V / (4.1-4.2V) |
| VOLTAGE TOLERANCE | ±1% |
| LINE REGULATION | ±0.5% |
| LOAD REGULATION | ±1% |
| HOLD UP TIME(Typ) | 50ms/230VAC at full load |
| INPUT | VOLTAGE RANGE | 90-264VAC |
| FREQUENCY RANGE | 47-63Hz |
| EFFICIENCY (Typ) | >85% /230VAC >80%/115VAC at full load |
| POWER FACTOR (Typ) | PF>0.95 at full load |
| | AC CURRENT | 115VAC | 2A at full load |
| 230VAC | 1A at full load |
| INRUSH CURRENT (Typ) | <36A/230VAC <15A/115VAC at full load |
| LEAKGE CURRENT | <0.5mA |
| PROTECTION | OVERLOAD | 115-130% rate output power |
| | | Protection type:Constant current limiting,recovers automatically after fault conditiond is removed |
| OVER VOLTAGE | 5.5V |
| | Protection type:Shut down o/p voltage,re-power on to recover |
| OVER TEMPERATURE | 80℃±5℃ |
| Protction type:Shut down 0/p voltage,recovers automatically after temperature goes down |
| ENVIRONMENT | WORKING TEMP | –20~+60℃ |
| WORKING HUMIDITY | 5~95% RH |
| STORAGE TEMP.,HUMIDITY | –40~+85℃.5~95% RH |
| | TEMP.COEFFICIENT | ±0.05% (0~50℃) |
| VIBRATION | 10~100Hz 2G 10min./1cycle,60min.each alongX,Y,Zaxes |
| SAFETY | WITHSTAND VOLTAGE | I/P-O/P:3KVAC,5mA I/P-FG:1.5KVAC,5mA, O/P-FG:0.5KVAC,5mA |
| | ISOLATION RESISTANCE | ≥100M |
| OTHERS | MTBF | 50000hours |
| DIMENSION | 220*60*26mm(L*W*H) |
| | PACKING | |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature |
| 2.Ripple&noise are measured at 20MHZ of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor. |
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. |
| | 4.The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed |
| that it still meets EMC directives. |
| 5.Derating may be needed under low input voltages,Please check th derating curve for more details. |
