High quality Food Industry modular belts for transportation lines

Transportation and daily maintenance of plastic conveyor belt

1.During storage, the product must be placed into a roll not folded, turning once during placement should be on a quarterly basis

2.Different type, size layers together using the belt should

3.Type conveyor belt, structure, size, number of layers should be a reasonable choice according to the conditions

4.Feed direction along the direction of the tape should be, in order to reduce the impact on the whereabouts of the tape should be taken when the material

 chute, reducing materials falling distance

Conveyor belt in use should note the following

1.Avoid roller is covered with material, resulting in ineffective rotation to prevent leakage of material between the roller and the tape card, pay attention to the

 lubrication of moving parts,

2.Avoid starting with a over load

Feature of Plastic modular conveyor belt 

Plastic modular conveyor belt using belt injection splicing, and with supporting the drive sprocket, with no deviation drive replacement easier cleaning characteristics.Plastic mesh belt drive module is stuck in the belt sprocket sprocket grooves are opposite the corresponding drive, so no deviation.Plastic modular conveyor belt is easier to replace because it is wearing a matching pin 

assembled, it can be based on partial replacement of damaged parts, it is unnecessary to replace the whole one , to save a certain amount of expenses.

Plastic modular belt is relatively flat and smooth surface, can be directly rinsed with water and wash with some tools.Plastic materials have arbitrarily 

chosen to achieve and satisfy the conditions customers, there are food-grade plastic belt and high temperature plastic mesh and plastic mesh belt wear

 and rally.Is a new type of environmentally friendly technology conveyor ideal supplies. Plastic mesh is also called plastic modular belt belt is the 

introduction of foreign advanced technology, using molds for injection molding and then stitched together according to customer demand.

Flush Grid plastic conveyor belt

Straight running plastic conveyor belt

Belt date

.Always check with Customer Service for precise belt

width measurement and stock status before

designing a conveyor or ordering a belt.

• Smooth upper surface and straightforward design

provides free product movement.

• Flights and Sideguards are available.

• Series 400 Flush Grid is available with rod

retention for belts 6.0 ft. (1829 mm) wide and wider. All

Series 400 Flush Grid with Abrasion Resistant rods are

available with rod retention. All other

Series 400 Flush Grid belts use the standard headed

rods.

• Series 400 Flush Grid in Acetal and EC Acetal must be

used with metal split sprockets only.

Specifications

A.High wear resistant
B.Water and Oil proof
C.Quality Guaranteed with ISO9001:2000
D.Perfect quality and lowprice

Modular belts are constructed with modules molded from thermoplastic materials connected with soild plastic rods. Except for narrow belts (one 

complete module or less in width),all are built with the joints between modules staggered with those of adjacent rows in a "bricklayed" fashion. This 

structure can enhance transverse strength and it is easy for maintain.

The total plastic and cleanable design can solve the steel belts easily polluted.Now the cleanable design makes the belts very suitable for food industry 

area as well.Also there are be widely used in many other industries,such as container making,pharmaceutical and automotive,lines of battery and so on.
Rellwin company has a widely range of different material and structure belts. The range of Rellwin's modular belts varies from 3/8 inch small pitch 

straight running belts to 2inch pitch sideflexing belts,The most commonly used belt styles inclued:
Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.
Flush Grid:commonly used in applications where drainage or airflow is desired.
Raised Rib:recommended in applications where product stability over transfers is a concern.
Friction Top:commonly employed on incline conveyors, where the elevation of product changes.Friction Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.
Roller Top:used in a variety of low-pressure accumulation applications.
Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.
Other,less frequently used belt styles may better fit your special requirements:Open Grid,Nub Top(anti-stick),Cone Top(extra grip).

Why choose the modualr belts?

Modular conveyor belt in an interlocking manner or bricklaying way intertwined by the total length of the pin assembly together, this design improves the 

strength of the belt fundamentally. (Rellwin) has extensive experience in the design and application of modular belt fields.

Introduce the specific advantages modular conveyor belt has,compared to other ,in brief sentence.

Rellwin modular conveyor belt bring more valuable solutions than ordinary belts

What are the benefits can the modular bring you?

·By extending the life of the conveyor belt (from a few weeks or a few months to several years extended), significantly reducing the cost of replacement of

 the belt 

·Save maintenance time and costs: modular design lets you do not need to remove the entire belt to replace the damaged section 

·Eliminate deviation and associated costs: drive sprocket tooth forced deviation phenomenon does not occur 

·The risk associated with the bond

 reduced 80% cut-off

·Eliminate all costs associated with the conveyor belt vulcanization, stitching, bonding and surface inspection-related

·Reduce the slope of the yield loss transfer applications: Intralox belt so you can build conveyor Z-shaped configuration, thus

 eliminating the delivery point will cause product damage, while saving space and reducing the number of drive motors required

·Reduce the risk of contamination due to damage caused by the belt

Rellwin modular conveyor belt bring more valuable solutions than metallic belt

What are the benefits can the modular bring you?

·By extending the life of the conveyor belt (from a few weeks or a few months to several years extended), significantly reducing the cost of replacement 

of the belt

·Save maintenance time and costs: modular design lets you do not need to remove the entire belt to replace the damaged section 

·Reduce the risk of contamination due to damage caused by the belt

Our services

1. Warranty time: 1 year.  The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .

2. Payment: T/T , L/C , Western Union or Paypal .

3. Lead time: 5~15 working days, subject to the order quantity.

4. Shipment: by sea, by air,door to door service for samples transportation.

5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .

Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.