QNB Rubber top modular conveyor belt an inherently strong design

Rubber top modular conveyor belt
Rellwin belts are made of plastic modules. Belts are assembled in an interlocked, bricklayed pattern with full-length hinge rods – an inherently strong design.
strong and reliable
The RW QNB rubber top conveyor belt has increased performance in the following industries/applications:
1. Bakery applications including pan handling and incline/decline box or pan applications.
2. Meat or poultry applications including packaging lines and incline box conveyors.
3. Beverage applications including depalletizers, accumulation tables and incline case conveyors.
4. Can manufacturing applications including palletizers, mass handling and accumulation tables.
5. Corrugated applications including downstacker, corrugator take off, transfer car and WIP storage.
6. Tire applications including wigwag, extruder takeaway and inspection applications.
7. Material handling applications including incline applications, palletizers and packaging lines.
Product features and operational benefits:
1. Strong, bi-directional belt for long conveyors
2. Rough Top non-slip surface for increased worker safety
3. Unique locking system for easy maintenance
4. Unique sprocket engagement reducing pulsation and increasing load capacity

rubber top QNB conveyor belts manufacturers 

Friction transmission rubber belt

plastic modular rubber top  conveyor belting suppliers 

QNB modular CONVEYOR BELT WITH RUBBER TOP



factory modular conveyor belt 

SPROCKETS FOR QNB

Sprockets data

 Friction conveyor belt is the use of engineering plastics production chain plate assembly made of modular belt with interlocking brickway interleaved mode or by 

the total length of the pin assembly together, this design is fundamentally improve the conveyor belt strength.Flights and side panels can also be 

interlocked with the hinge pin has become integral parts of the conveyor belt. Plastic belt has too much forms, assembling flexible, easy to replace. There 

are openings in the form, flat, ribs, ball, slip and other forms. Apply to pigs, sheep, chickens, ducks slaughtered , cutting and processing, puffed food 

production line, fruit grading, packing lines, fish processing production line, frozen food production line, battery manufacturing, beverage manufacturing, 

canning industry, agro-industry, chemical industry , electronics, rubber and plastic manufacturing industry, the cosmetics industry, the general transport operations

Advantage

  Precision molding process ensures optimum flatness.

  High wear resistance and low friction coefficient

  High work load

Our company has been qualified with ISO 9001:2000 quality system. The production strictly complies with the standard and procedures of ISO 9001, which ensures good product quality.

If you are interested in ourproducts, please feel free to contact us.

 Feature of Plastic modular conveyor belt 

Plastic modular conveyor belt using belt injection splicing, and with supporting the drive sprocket, with no deviation drive replacement easier cleaning 

characteristics.Plastic mesh belt drive module is stuck in the belt sprocket sprocket grooves are opposite the corresponding drive, so no deviation.

Plastic modular conveyor belt is easier to replace because it is wearing a matching pin assembled, it can be based on partial replacement of damaged parts, 

it is unnecessary to replace the whole one , to save a certain amount of expenses.Plastic modular belt is relatively flat and smooth surface, can be directly 

rinsed with water and wash with some tools.Plastic materials have arbitrarily chosen to achieve and satisfy the conditions customers, there are

 food-grade plastic belt and high temperature plastic mesh and plastic mesh belt wear and rally.Is a new type of environmentally friendly technology

 conveyor ideal supplies. Plastic mesh is also called plastic modular belt belt is the introduction of foreign advanced technology, using molds for injection

 molding and then stitched together according to customer demand.

Conveyor belt category

All the conveyor belt must be connected in a ring to use, so joint of conveyor belt directly affect the service life of conveyor belt and if conveyor can run 

smooth .Generally,conveyor belt connector commonly used method of mechanical joints, cold thermal curing of adhesive joints, joints, etc. Method of 

mechanical joints: generally,refers to the use of belt buckle connectors, the connection method is convenient and easy, economical, but the low efficiency of 

the joint, easy to damage, has an impact on conveyor belt service life .PVC and PVG solid woven flame retardant antistatic conveyor belt junction, class 8

, with the following products are generally used this method of joints. Conveyor belt cold bonding connection method: using cold bonding adhesive for joints.

 This joint approach than a mechanical joint of high efficiency and more economical, connector should be able to have a better result, but in practice, due to

 process conditions is difficult to master and adhesive quality very large impact on joints, so it is not very stable.Conveyor belt vulcanizing joints: 

a proved to be ideal for a joint approach to ensure high efficiency of the joint, but also very stable, long life joints and easy to grasp. But technical troubles,

 high costs, the connection time and other shortcomings.

Our services

1. Warranty time: 1 year.  The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .

2. Payment: T/T , L/C , Western Union or Paypal .

3. Lead time: 5~15 working days, subject to the order quantity.

4. Shipment: by sea, by air,door to door service for samples transportation.

5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .

Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd