TBEA 3135

High-efficiency photovoltaic module using silicon nitride polycrystalline silicon cells
Performance                    TBEA 3135              TBEA 3130               TBEA 3125              TBEA 3120
Rated power (Pmax)         135W                      130W                       125W                      120W
Module tolerance               ±5%
Nominal voltage                 12V
Warranty                           25years                      

Qualification test parameters
Temperature cycling range:       -40°C to +85°C (-40°F to 185°F)
Damp heat test:       85°C, 85% relative humidity
Front and rear static load test (e.g.: wind):       2,400 Pa (50psf)
Front load test (e.g.: snow):       5,400 Pa (113psf)
Hailstone impact test:       25mm ? (1 inch) at 23m/s (52mph)

Typical electrical characteristics         TBEA3135        TBEA3130       TBEA3125        TBEA3120
Rated power (Pmax)                         135W               130W              125W               120W
Voltage at Pmax (Vmp)                     17.4V               17.3V             17.4V                17.2V
Current at Pmax (Imp)                         7.76A                7.5A               7.2A                 7.0A
Short circuit current (Isc)                     8.4A                 8.2A                8.1A                 8.0A
Open circuit voltage (Voc)                   22.0V                22.0V              22.0V               21.8V
Temperature coefficient of Isc:       (0.065±0.015)%/ °C
Temperature coefficient of Voc:        - (80±10) mV/°C
Temperature coefficient of Pmax:        - (0.5±0.05)%/ °C
NOCT:       47±2°C    (Air 20°C; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating:       15A
Maximum system voltage:   600V (US NEC rating);1000V (TUV SUD rating);1000V (IEC 61215 rating)

Contact Supplier