PU FOAM Spray GUN
The Gun is connect very well with the PU FOAM BOTTLE
1. Shake the foam can well. Then screw it on spray gun.
2. Screw the can into the adapter. (Don't too tight.)
3. Press the trigger 2 seconds. Let the foam fill the lengthening pipe, in order to expel the residual air.
4. When operating, keep the can vertical.
5. The foam output flow is proportional to the flow of control device. (Front: +; Rear: -)
6. When changing a new can, please fix it within one minute.
7. To prevent foam cured in the spray gun, please avoid other substance being access into the adapter.
8. When stop operating, please don't take the can off spray gun. Meanwhile, keep the can vertical.
9. After cleaning the foam on the spray gun, please fill the cleaner into the gun until operating.
10. When need to adjust flow smaller, please fix accessory nozzle on muzzle. (Note: after using, please completely clean it. Don't use hard things to clean the gun, to avoid leakage.)
11. Don't fling to avoid damage.
Using way