inconel 601 600 625 wire mesh/ inconel wire mesh

               inconel 601 600 625 wire mesh/ inconel wire mesh

1.specification of inconel wire mesh

material: inconel alloy 600 601 625 718 800 825 wire.

mesh:1-200mesh

wire dia:0.2mm-2.0mm

roll width:0.5-1.5m

roll length:30m,we can customize.

here are the material introductions for you:

Inconel alloy 600 is resistance to corrosion by many organic and inorganic compoundsand also makes itvirtually im supper alloy inconel 600 601 alloy knitted wire mesh for heat system mune to chlo-rideionstress-corrosion cracking.alloy 600 is used extensively in the chemical industry for its strength and corrosion resistance.Applications include heaters,stills,bubble towers,and condensers for processing offatting acids and so on.

Inconel alloy 601 has good high temperture strength,and retains its ductility after long service exposure,and good hot corrosion resistance under oxidizing conditions.Alloy 601 is used for industrial fur-naces;heat-treating equipment such as baskets,muffles,and retorts;petrochemical and other proces sequipment;and gas-turbine components.

Inconel alloy 625 has a high level of pitting and crevice corrosion resistance to chloride contaminated media,such as sea water,neutral salts and brines,Alloy 625 used in chemical processing,aerospace and marine engineering oil &gas,pollution control equipment and nuclear reactors.

inconel alloy 718 has excellent corrosion resistance at high and low temperatures and good resistance to stress-corrosion cracking and pitting corrosion.Alloy 718 has good performance in hostile environments containing H2S,CO2,chlorides,sulfides and free sulfur at selected temperatures.Alloy 718 is commonly used for cryogenic storage tanks,downhole shafts and wellhead parts.

Inconel alloy 800 resiss sulfur attack,internal oxidation,scaling and corrosion in a multitude of environments.Alloy 800 is used in a variety of applications involving expoeure to corrosive environments and high tempertatures.It is used for heat-treating equitment such as baskets,trays,fixtures,and used for heat exchangers and other piping systems in nitric acid media.

Inconel Alloy 800H has excellent corrosion resistance in the water media at extremely high temperature of 500 degree.Its higher nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition.High chromium content made it better resistance to priting and crevice corrosion cracking.This alloy can resist nitric acid and organic acid,but it is not so fine in the sulfuric acid and hydrochloric acid.

Inconel Alloy 825 has excellent resistance to stress corrosion cracking and good pitting resistance in all environments except strongly oxidizing chloride solutions.Alloy 825 is used in chemical processing,pollution control,oil and gas recovery,acid production,pickling operations,nuclear fuel reprocessing and handling of radioactive wastes.

also we can supply inconel 840 incoloy 901,925,926 wire meshes.because the space is not enough, i will not introduction one by one, while if you have any need, pls contact us freely.

packing &delivery

package:usually inside use water-proof paper,and outside use plastic woven bags, and then use wooden pallets.

delivery:

(1). Door delivery :small quantity and weight,we suggest ship the goods through fedex / DHL / UPS / TNT.The delivery lead time id 4~5 days.

(2). Air-Cargo Shipments : If the weight of shipment is 200 ~ 300 kilograms we suggest for the air-cargo shipment mode, 

Delivery lead time is 5~6 days.

(3). Sea Cargo Shipments : For the big wholesalers and the distributors we suggest the sea-shipment mode. The delivery leadtime depends upon the destination.

2. Workshop of inconel wire mesh ,

  we must ensure workshop is clean absolutely , so that ensure quality .

3.Usage:filter,industry, marine, oil industry etc.

Below is the weave stype:

4.Package:We check quality ,then pack with karft paper + paper tube