Description:
For GM Tech-2 PRO Kit (CANdi & TIS) has been developed for the sole purpose of diagnosing and repairing GM automotive systems with electronic controls and interfaces. Every attempt has been made to provide complete and accurate technical information based on factory service information available at the time of publication.
Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems from year 1992 current.
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for GM vehicles late model.
Support for on-board diagnostics on all GM systems from 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Software supports the following languages:
For Opel TIS: English, German, Bulgarian, Russian, Croatian, Slovenian.
For SAAB TIS: Chinese (Simple), Chinese (Traditional), German, English (American), Spanish, Finnish, French, Italian, Japanese, Korean, Dutch, Russian, Swedish, Thai.
For Isuzu TIS: Chinese (Simple), Chinese (Traditional), Czech, Danish, German, Greek, English (American), Spanish, Finnish, French, Hungrian, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese (Brazil), Portuguese (Portugal), Russian, Swedish, Thai, Turkish.
GM Tech-2 Kit includes:
Tech-2 Flash Tester
CAN diagnostic interface module (CANdi)
Memory card 32MB
TIS 2000 USB dongle
DLC cable
Cigarette lighter power cable
Battery power cable
SAE 16/19 pin adapter (OBD II)
NAO 12/19 adapter
DLC loopback adapter (selftest)
Carrying case
GM Tech-2 Starter Kit with CANdi Module & TIS Kit includes:
Tech-2
3000164-CANdi module
Memory card 32MB- 1PCS
Kit of the cables:
3000095-DLC cable
3000096-Cigarette lighter power cable
3000097-Battery power cable
3000098-SAE 16/19 pin adapter (OBD2)
3000099- NAO 12/19 adapter
3000109-DLC loopback adapter (selftest)
DVD with software:
Opel TIS 01/2008,
SAAB TIS 1/2008,
NAO TIS 10/2007,
ISUZU TIS 03/2006;
Manuals in DVD
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; You will need the Tech-2 Flash and a CAN diagnostic interface module. The module connects between the Tech-2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
Dimensions
12×6×2
Microprocessor
32 bit, 16 MHz
Memory
32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications
Integral RS232 communication port.
Screen
3.8×2.8 backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once
· 05 Buick Allure ( 3.6L )
· 05 Buick LaCrosse ( 3.6L )
· 05 Buick Rainier ( 5.3L )
· 04-05 Buick Rendezvous ( 3.6L )
· 04-05 Cadillac CTS ( 3.6L )
· 04-05 Cadillac SRX ( 3.6L / 4.6L )
· 04-05 Cadillac XLR ( 4.6L )
· 05 Cadillac STS ( 3.6L / 4.6L )
· 05 Chevrolet Cobalt ( 2.2L )
· 05 Chevrolet Corvette ( 6.0L )
· 05 Chevrolet Equinox ( 3.4L )
· 05 Chevrolet TrailBlazer ( 5.3L )
· 05 Chevrolet SSR ( 6.0L )
· 04 Chevrolet Malibu (Body/Chassis only)
· 05 Chevrolet Malibu ( 3.5L )
· 05 GMC Envoy ( 5.3L )
· 05 Pontiac G6 ( 3.5L )
· 05 Pontiac GTO ( 6.0L )
· 05 Pontiac Pursuit ( 2.2L )
· 03-05 Saturn ION ( 2.2L )