4 5/8"IADC517 TCI tricone bit
Basic Info.
Model NO.: | 4 5/8" IADC 517 |
---|
Certificate: | ISO |
---|
Type: | Petroleum Drilling Tool & Accessory |
---|
Usage: | Well Drilling Machinery |
---|
Export Markets: | Global |
Product Description
Sizes from 3 7/8" to 26"
Covers almost all IADC codes.
Stocks adequate&timely delivery
Good quality and after-sale service
30 years experience in drill equipment
Please specify the following items as many as possible in enquiry:
Bit diameter
IADC code
Bearing type
Drilling formation
Drillig depth
Soft formation TCI tricone bits:
The soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
Medium formation TCI tricone bits:
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Medium hard formation TCI tricone bits:
The medium hard formation TCI tricone bits features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Hard formation TCI tricone bits:
The hard formation TCI tricone bits can be used to drill hard and abrasive formations. Wear resistance tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life.
Size | 4 5/8" (117.4mm) |
IADC | 517 |
Bearing Type | Elastomer sealed journal bearing |
Thread Connection | 2 7/8 reg pin |
WOB(KN/mm) | 0.35~1.0 |
RPM(r/min) | 140~60 |
Applicable Formations | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
Circulation system | Mud pump |