INTRODUCTION
This kind of filter is used in the hydraulic system for fine filtration. The filter can
filter metal impurity, rubber impurity or other contamination, and keep the tank clean. This filter can be installed on the top of the cover directly or installed with pipe.
It has indicator and by-pass valve. When the dirt accumulate in the filter element or the temperature of
the system is too low, and the oil inlet pressure reaches 0.35MPa,the indicator will give signals showing
that the filter element should be cleaned, changed or rise the temperature. If no service is done and as
the pressure reaches to 0.4MPa,the by-pass valve will open. The filter element is made of glass fiber;so
it has high filtration accuracy, low initial pressure loss, high dirt-holding capacity and so on. Filter radio
3 5 10 20 200, filterefficiency n 99.5 and fit the ISO standard.
RF60 LY/C 0060R BN/HC
RF110 LY/C 0110R BN/HC
RF160 LY/C 0160R BN/HC
RF240 LY/C 0240R BN/HC
RF330 LY/C 0330R BN/HC
RF500 LY/C 0500R BN/HC
RF660 LY/C 0600R BN/HC
RF950 LY/C 0850R BN/HC
RF1300 LY/C 0950R BN/HC
1300R BN/HC