Stainless steel used oil purification machine with vacum system,high quality,low cost,CE Marked

Generally, hydraulic oil is to be maintained at very high quality of Purification. The Oil often having large sizes of particles is passed through coarse type filter, to trap the large sized particles. Having taken care of micronic and sub-micronic particles, it is further finely cleaned by electro-statically, operated hydraulic oil cleaner & brought to the international standards.

When it starts working, the used oil will be poured into the heater to heat under the vacuum pressure, then the heated oil enter into the primary filter which will eliminate the big impurities, then the oil enter into the vacuum separator, the oil will flow the special radiation device, which make the unit/volume oil to produce a large surface area, lets the pollution oil exposure in the low humidity atmosphere, thus the water, air and gas can be eliminated.   The treated vapor and gas form the gaseous mixture becomes the liquid through the water tank and the chiller condensation, then the liquid enters water receiver together, the vacuum extracts the surplus gas.

The oil which is drained away water flow into precision strainer where can exhaust particulates (oil purification). According the quantity of the water content, a whole purification needs many times circulation to drain away the water.  

Oil Data after Treatment                          

Moisture (water content)	≤80 PPM (remove 100% of free water and 95%of dissolved/emulsified water)
Gas Content	≤0.01%
Suspended Particles (Filtration precision)	≤1 ~ 5 micron
Demulsification	New oil≤15min, running oil≤30min
Cleanliness	≤NAS 1638 Grade 5

Contact Supplier